HYUNDAI TUCSON TL MK3 15-20 ALLOY WHEEL RIM 19" 52910-D7420 7.5x19
|
Part number 52910-D7420. We take parts off vehicles every week, and this page is updated with a link straight to the part as soon as another one arrives. OUT OF STOCK In the meantime you can see every Hyundai part we have in stock, or you can send us a message and we will tell you the day one comes in. |
Notify me when this part is back in stockLeave your email address and we will write to you the day part number 52910-D7420 comes in. We use your address for that message only. |

The last part of this number we had in stock.
|
What this part sells for We last sold a part with this number on 2026-06-13 for GBP 125.00, delivered. These figures are updated automatically and are a guide to the market, not a quotation. The price of the part we have in stock is on its own page. |
About part number 52910-D7420An alloy wheel rim is part of the running gear and suspension system. It attaches directly to the wheel hub with wheel nuts or studs and holds the tyre, creating the airtight seal required to keep it inflated. When it is working correctly, it provides a smooth, balanced drive without any vibration through the steering wheel or seat. To ensure this is the correct item for your vehicle, you must match the part number 52910-D7420 directly with the number stamped on your original rim. On a part like this, the manufacturer part number and size dimensions are usually stamped into the rear face of the spokes or around the back of the centre mounting face. Matching this exact number is what determines if the part will fit. When replacing a wheel rim, a technician will typically require a new tyre, a replacement air valve or tyre pressure monitoring sensor, and fresh wheel weights for balancing. People usually replace a rim because the original has suffered impact damage from a pothole, developed a hairline crack that leaks air, or sustained heavy kerb rash. |
About this kind of part: alloy wheelsAn alloy wheel is a cast or forged aluminium wheel. Four numbers describe it and all four have to match the car: the diameter in inches, the rim width in inches followed by the letter J, the number of bolt holes with the circle they sit on in millimetres, and the offset, marked ET, which is how far the mounting face sits from the centre line. A casting number is marked on the back of the spokes or inside the rim, and that number is what identifies the exact wheel rather than one that merely looks the same. Why people replace one
Fitting it
Making sure it is the right one
What to look for in the photographs
This section describes alloy wheels parts in general. The numbers and the photographs above are this part. |
|
Free next-day delivery in the United Kingdom Sent with DPD on a tracked, next-day service. Most mainland addresses are next day; the Highlands and Islands, Northern Ireland, the Channel Islands and the Isle of Man can take a day longer. Returns Thirty days to change your mind, and we pay the return postage in the United Kingdom and Germany. Trade and VAT C.E.J Haime Group Limited is VAT registered in England and Wales, and every order comes with a full VAT invoice. Not sure it is the right part? Send us your registration or VIN and we will check this part number against your own vehicle before you buy. |