NISSAN JUKE F16 MK2 Z10 NBV RED FRONT BUMPER 620226PA0H 2018-2021 22

In stock now

We have part number 620226PA0H in stock and ready to send, with free next-day delivery in the United Kingdom.

See the part and the current price

About part number 620226PA0H

A front bumper is an exterior body panel mounted at the very front of the vehicle. It covers and protects internal components, improves aerodynamic airflow, and absorbs light impacts in low-speed collisions. When a painted plastic bumper is fitted correctly and working as intended, the driver notices a clean, complete appearance with bodywork that aligns neatly with the surrounding panels.

To confirm that this part is correct for your vehicle, you must check that the manufacturer part number matches your original item exactly. The part number for this item is 620226PA0H. On a front bumper, the part number is usually stamped or molded into the plastic on the inner, concealed side of the panel. Matching this specific number is the only way to guarantee correct fitment.

A front bumper is commonly replaced due to stone chips, parking scrapes, cracks from minor accidents, or broken mounting tabs. When fitting a replacement bumper, a person often needs additional fixing clips, plastic rivets, or mounting brackets, as these original fasteners frequently break during removal.

• Part type: Bumpers & Reinforcements.
• Specification: items included BUMPER ONLY; material Plastic; colour Red; features Easy Installation; finish Painted.
• Position on the vehicle: Front.

About this kind of part: bumper covers

A bumper cover is the painted plastic skin across the front or the rear of a car. It is not a structural part. Behind it sit a foam or honeycomb absorber and a steel or aluminium reinforcement bar, and those are what take an impact. The cover carries the grille apertures, the number plate plinth and the openings for parking sensors, washer jets and tow eyes, so one model can take several different covers depending on how it was specified when new.

Why people replace one

• A knock in a car park or a light collision has cracked or torn the plastic. A tear can be plastic-welded, but it rarely returns to a finish that will take paint without showing.
• The paint has faded or crazed differently from the panels around it. A bumper flexes and sits low in the spray from the road, so it ages faster than a wing.
• The mounting tabs along the top edge or inside the wheel arches have snapped, so the cover stands proud of the panel next to it.
• An earlier repair has been filled and has begun to lift.

Fitting it

• It is held by screws along the top edge, screws or clips inside each wheel arch, and plastic nuts underneath the car.
• Lamps, grilles, sensors, washer jets and the number plate plinth usually move across from the old cover.
• A cover is supplied either in primer or in the colour it was sprayed when new. A matching finish needs the paint code from the car's own identification plate.
• Parking sensors go back into their own openings, and the trim rings around them are often specific to the colour.

Making sure it is the right one

• Match the part number moulded into the old cover rather than matching the shape. A facelift changes the number while the outline can look almost the same.
• Check whether the car has parking sensors. A cover with no sensor openings cannot be used on a car that has them, and drilling one is not a repair.
• Count the openings and compare them: fog lamp apertures, the tow eye cover and any camera or washer cut-out differ between trim levels on the same model.

What to look for in the photographs

This section describes bumper covers parts in general. The numbers and the photographs above are this part.

Parts we have that go with this one

Most repairs need more than one part, and these came off the same area of the vehicle. Each has its own page, which says whether we have one in stock today.

• JUKE Mk1 5 Door Hatchback Complete Red Rear Bumper | Part number 85022BV80H
• JUKE F16 FRONT BUMPER LOWER SECTION GRILLE 620266PA1B GENUINE
• from JUKE WHEEL ARCH TRIM LEFT REAR 788611KA6A
• Genuine Juke RIGHT Front door window seal 803306PA0D
• Juke 10-19 Front Bumper Reinforcer Impact Absorber Bracket Right Hand | Part n
• JUKE F16 -ON GENUINE FRONT LEFT WHEEL ARCH TRIM 63861-6PA0B
• JUKE F16 MK2 Fuel Filler Base G81206PAAA NEW GENUINE
• JUKE F16 RIGHT REAR WHEEL ARCH TRIM MOULDING 78860 6PA0A

Free next-day delivery in the United Kingdom Sent with DPD on a tracked, next-day service. Most mainland addresses are next day; the Highlands and Islands, Northern Ireland, the Channel Islands and the Isle of Man can take a day longer.

Returns Thirty days to change your mind, and we pay the return postage in the United Kingdom and Germany.

Trade and VAT C.E.J Haime Group Limited is VAT registered in England and Wales, and every order comes with a full VAT invoice.

Not sure it is the right part? Send us your registration or VIN and we will check this part number against your own vehicle before you buy.

Ask us about this part

Other part numbers on this site

• NISSAN JUKE F16 2018-2024 RIGHT REAR WHEEL ARCH TRIM MOULDING 78860 6PA0A
• NISSAN JUKE FRONT BUMPER GRILL 62070-BV84A GENUINE
• Nissan Juke MK2 2019-2023 Under Engine Tray Cover 758905940R
• NISSAN LEAF 2020 FRONT RIGHT FOG LIGHT HOLDER BRACKET 62256-5SK0B OEM
• NISSAN LEAF BUMPER FOAM REAR 2018-2024 85090-5SH1A
• NISSAN LEAF FRONT BUMPER UPPER TRIM CHARGE PORT SURROUND 62320-5SH0C 623205SH0A
• Nissan Leaf Left Side View Mirror with Camera 2270.5001
• NISSAN LEAF MK2 ZE1 2017-2022 REAR BUMPER GENUINE 850225SH0H
• NISSAN LEAF SLAM PANEL TRIM CHARGE PORT SURROUND 2018-2023 623225SK0A
• NISSAN LEAF ZE1 MK2 Front Bumper Cover 620225SH1H NEW GENUINE

See every Nissan part number we list · All part numbers · Everything in stock now