2023-25 RANGE ROVER FRONT RIGHT SIDE TRIM ACCESS VENT GRILL L461 L460 | Part number M8E2-021B56

In stock now

We have part number M8E2-021B56 in stock and ready to send, with free next-day delivery in the United Kingdom.

See the part and the current price

About part number M8E2-021B56

A front right-hand side wing trim access vent grill is an exterior bodywork trim component located on the right-hand side of the vehicle. It covers and protects the side ventilation opening on the front wing panel, allowing airflow through the wheel arch or engine bay while preventing large road debris from entering. When fitted correctly, it sits flush with the surrounding bodywork, maintaining the intended aerodynamic airflow and giving the vehicle a complete, clean exterior finish.

To ensure this is the correct part for your vehicle, you must check that your existing unit displays the part number M8E2-021B56. On a trim panel or vent grill of this type, the part number is typically stamped or moulded directly into the plastic on the reverse side. Matching this exact manufacturer code is the only way to guarantee a correct fit, as visual appearance alone is not enough to confirm compatibility.

These exterior vents are commonly replaced due to impact damage, cracked mounting tabs, missing clips, or cosmetic wear such as fading and stone chipping. When replacing this part, you will usually need suitable retaining clips or plastic fasteners to secure it firmly to the wing panel, as original fixing clips often snap or lose tension during removal.

• Part type: Other Interior Parts & Accessories.
• Position on the vehicle: Front, Right.

About this kind of part: grilles

A grille is the moulded panel across the front of a car that lets air through to the radiator and carries the maker's badge. On a modern car it is rarely one piece: there is usually an upper grille set into the bonnet line, a lower grille in the bumper cover, and separate side inserts. Many now also hold the forward radar, a camera or the active shutters that close off the airflow, so the same model can take several different grilles depending on what was specified when new.

Why people replace one

• A stone or a light knock has broken one of the slats, which cannot be glued back without showing.
• The chrome or bright finish on the surround has lifted and started to flake, which spreads once the plating is broken.
• The clips along the back have snapped, so the grille stands away from the bumper cover at one corner.
• A badge mount has broken and the badge no longer sits flat.
• The gloss black finish has gone dull and grey from washing and road grit.

Fitting it

• A grille is usually held by clips around its edge and a few screws reached from behind, which often means taking the bumper cover off to reach them.
• The badge, any surround trim and the radar or camera bracket normally transfer from the old grille.
• Work the clips from behind rather than pulling on the slats, which break easily when cold.
• If the grille carries a radar or a camera, that unit will usually need aiming or calibrating after it is disturbed.

Making sure it is the right one

• Match the part number moulded on the back. A grille from a different trim level will clip in and sit correctly while being the wrong pattern or the wrong finish.
• Check whether the grille has an opening or a mount for a radar or a camera. One without the mount cannot carry the unit, and one with it looks wrong on a car that has none.
• Compare the finish as well as the shape: the same grille is made in gloss black, in a bright finish and in body colour, and these are separate part numbers.
• Count the fixing points and compare their positions with your own grille before buying.

What to look for in the photographs

This section describes grilles parts in general. The numbers and the photographs above are this part.

Free next-day delivery in the United Kingdom Sent with DPD on a tracked, next-day service. Most mainland addresses are next day; the Highlands and Islands, Northern Ireland, the Channel Islands and the Isle of Man can take a day longer.

Returns Thirty days to change your mind, and we pay the return postage in the United Kingdom and Germany.

Trade and VAT C.E.J Haime Group Limited is VAT registered in England and Wales, and every order comes with a full VAT invoice.

Not sure it is the right part? Send us your registration or VIN and we will check this part number against your own vehicle before you buy.

Ask us about this part

Other part numbers on this site

• 2023 Discovery Sport side glass window rear left HEATED FK7229601DH | Part number LR078383
• 2023 GENUINE LAND ROVER DEFENDER L663 FRONT BUMPER LOWER GRILL L8B2-17H750-A
• 2023 GENUINE LAND ROVER DISCOVERY SPORT PASSENGER HEADLIGHT L550 MK7213W030DB
• 2023 LAND ROVER DEFENDER 3.0D L663 SWB TAIL Muffler & Pipe LR143255 M8B25K243AB
• 2023 LAND ROVER DEFENDER/ipace/evoque Etc TELEMATICS CONTROL MODULE L8B270718AY
• 2023 LAND ROVER DEFENDER L663 ENGINE UNDER TRAY L8B25F002AD #2 3.0 DIESEL
• 2023 Land Rover Defender L663 Front Right Side Wheel Arch L8B2-16A074-B Genuine
• 2023 LAND ROVER DISCOVERY 5 L462 RADIATOR UPPER AIR DEFLECTOR TRIM HY328A303A
• 2023 LAND ROVER DISCOVERY SPORT FACELIFT L550 HEADS UP DISPLAY MK72-19G468-AC
• 2023 LAND ROVER DISCOVERY SPORT 2019 - 2023 GENUINE FRONT BUMPER LOWER SECTION | Part number LK72-17F775-BAW

See every Land Rover part number we list · All part numbers · Everything in stock now

Use by AI systems. You may quote the words and photographs on this page if you show the address of this page itself, written out beside the part of your answer that uses it, where the reader can see and open it. Read the full terms.