Audi A3 Fuel Filler Cap Cover 2020 TO 2024 8Y4810593 Genuine

In stock now

We have part number 8Y4810593 in stock and ready to send, with free next-day delivery in the United Kingdom.

See the part and the current price

Audi A3 Fuel Filler Cap Cover 2020 TO 2024 8Y4810593 Genuine - part number 8Y4810593

Audi A3 Fuel Filler Cap Cover 2020 TO 2024 8Y4810593 Genuine - part number 8Y4810593 - view 2 Audi A3 Fuel Filler Cap Cover 2020 TO 2024 8Y4810593 Genuine - part number 8Y4810593 - view 3 Audi A3 Fuel Filler Cap Cover 2020 TO 2024 8Y4810593 Genuine - part number 8Y4810593 - view 4

The part we have in stock now.

About part number 8Y4810593

A fuel filler flap cover forms part of the exterior bodywork on a vehicle. It sits over the fuel cap to protect the filler neck from dirt and weather, while keeping the side of the car flush and tidy. When working correctly, it opens and closes smoothly so the driver can access the fuel cap easily when refuelling.

To make sure this part is correct for your vehicle, check the part number stamped directly on your original component. You can usually find this number on the inside face or housing of the flap. Matching the part number 8Y4810593, or the additional number 03022463S19, is the only way to guarantee a correct fit.

These covers are commonly replaced due to accidental impact damage, snapped hinges, or broken catch mechanisms. Because this part requires a respray to match your vehicle, anyone fitting it will usually need appropriate primer, paint, and clear coat to finish the job.

  • Part type: Fuel Flaps & Components.
  • Specification: seller warranty N/A.; colour NEED RESPRAY; features Easy Installation; finish Gloss; country of origin Czechia.
  • Position on the vehicle: None.
  • Also numbered: 03022463S19.

About this kind of part: fuel filler flaps

A fuel filler flap is the small painted door over the filler neck, with its hinge and usually a spring or a damper behind it. On an electric or a hybrid car the same part covers the charging socket and is often larger and electrically released. It is painted to match the body, which is why it is replaced far more often than it fails: the flap sits where people lean, and it is one of the few painted parts a careless hand touches every week.

Why people replace one

  • The flap has been creased or dented, usually by being pushed shut against the filler cap or by a knock at a pump.
  • The hinge has broken or the spring has failed, so the flap no longer stays shut or no longer stays open.
  • The paint has faded or the lacquer has lifted, which shows badly because the flap sits in the middle of a large flat panel.
  • The release mechanism or the electric actuator has failed and the flap no longer opens from inside the car.
  • A rear quarter panel has been repaired and the original flap was damaged in the process.

Fitting it

  • Most flaps unbolt from the hinge inside the filler recess, sometimes with the hinge as one assembly and sometimes as a separate part.
  • On a car with an electric release, the actuator and its loom stay with the car and the flap comes off on its own.
  • The seal or the foam around the recess is worth checking at the same time, because it is what stops water collecting in the bottom of it.
  • A flap is supplied in primer or in the colour it was sprayed when new, and a matching finish needs the paint code from the car's own identification plate.

Making sure it is the right one

  • Match the part number. A petrol or diesel flap and a charging flap for the same model are different parts, and so are the versions before and after a facelift.
  • Check whether yours comes with the hinge. Some models sell the flap alone and some sell it as an assembly, and the hinge is often the part that broke.
  • Compare the curvature against your own panel. A flap is pressed to the shape of one body line and will not sit flush in another.
  • Treat a painted used flap as a starting point for colour rather than a match, because it has aged with the car it came off.

What to look for in the photographs

A Part number — Stamped or on a label on the inner face, often under the hinge.
B Hinge — Whether the hinge is included and whether it is straight. A bent hinge is why most flaps no longer sit flush.
C Spring or damper — The mechanism that holds the flap open or shut. It is often what has failed, and it is sometimes a separate part.
D Inner face — The back of the flap, where water sits and where corrosion starts on a steel one.
E Outer surface — Look across the face at a shallow angle. A crease or a dent in a flat panel this small is invisible in a straight-on photograph.

This section describes fuel filler flaps parts in general. The numbers and the photographs above are this part.

Parts we have that go with this one

Most repairs need more than one part, and these came off the same area of the vehicle. Each has its own page, which says whether we have one in stock today.

Free next-day delivery in the United Kingdom Sent with DPD on a tracked, next-day service. Most mainland addresses are next day; the Highlands and Islands, Northern Ireland, the Channel Islands and the Isle of Man can take a day longer.

Returns Thirty days to change your mind, and we pay the return postage in the United Kingdom and Germany.

Trade and VAT C.E.J Haime Group Limited is VAT registered in England and Wales, and every order comes with a full VAT invoice.

Not sure it is the right part? Send us your registration or VIN and we will check this part number against your own vehicle before you buy.

Ask us about this part

Other part numbers on this site

See every Audi part number we list · All part numbers · Everything in stock now