GRILLE LAND ROVER RANGE ROVER SPORT DK6216C628 | Part number DK6216C628AD

In stock now

We have part number DK6216C628AD in stock and ready to send, with free next-day delivery in the United Kingdom.

See the part and the current price

GRILLE LAND ROVER RANGE ROVER SPORT DK6216C628 | Part number DK6216C628AD - part number DK6216C628AD

GRILLE LAND ROVER RANGE ROVER SPORT DK6216C628 | Part number DK6216C628AD - part number DK6216C628AD - view 2 GRILLE LAND ROVER RANGE ROVER SPORT DK6216C628 | Part number DK6216C628AD - part number DK6216C628AD - view 3 GRILLE LAND ROVER RANGE ROVER SPORT DK6216C628 | Part number DK6216C628AD - part number DK6216C628AD - view 4

The part we have in stock now.

About part number DK6216C628AD

A front radiator grille sits at the very front of the car, mounted between the headlights on the bodywork. It forms part of the exterior trim and protects the engine bay from large debris while allowing airflow into the radiator to cool the engine. When the grille is correctly fitted and undamaged, it maintains the neat appearance of the front bumper and keeps road dirt from directly hitting the cooling components behind it.

To confirm that this item is correct for your vehicle, you must match the part number directly. The part number for this item is DK6216C628AD. On a grille, the manufacturer part number is usually stamped or moulded into the plastic on the reverse side, away from the painted front surface. Matching this exact number is the only way to guarantee a correct fit, as small clip locations and moulding shapes vary.

A grille is usually replaced after a front-end impact, stone damage, or because the plastic mounting tabs have snapped off. When installing a replacement grille, you often need replacement plastic trim clips or mounting screws, as the original fixings frequently break or go missing during removal.

  • Part type: Grilles.
  • Specification: year 2016.

About this kind of part: grilles

A grille is the moulded panel across the front of a car that lets air through to the radiator and carries the maker's badge. On a modern car it is rarely one piece: there is usually an upper grille set into the bonnet line, a lower grille in the bumper cover, and separate side inserts. Many now also hold the forward radar, a camera or the active shutters that close off the airflow, so the same model can take several different grilles depending on what was specified when new.

Why people replace one

  • A stone or a light knock has broken one of the slats, which cannot be glued back without showing.
  • The chrome or bright finish on the surround has lifted and started to flake, which spreads once the plating is broken.
  • The clips along the back have snapped, so the grille stands away from the bumper cover at one corner.
  • A badge mount has broken and the badge no longer sits flat.
  • The gloss black finish has gone dull and grey from washing and road grit.

Fitting it

  • A grille is usually held by clips around its edge and a few screws reached from behind, which often means taking the bumper cover off to reach them.
  • The badge, any surround trim and the radar or camera bracket normally transfer from the old grille.
  • Work the clips from behind rather than pulling on the slats, which break easily when cold.
  • If the grille carries a radar or a camera, that unit will usually need aiming or calibrating after it is disturbed.

Making sure it is the right one

  • Match the part number moulded on the back. A grille from a different trim level will clip in and sit correctly while being the wrong pattern or the wrong finish.
  • Check whether the grille has an opening or a mount for a radar or a camera. One without the mount cannot carry the unit, and one with it looks wrong on a car that has none.
  • Compare the finish as well as the shape: the same grille is made in gloss black, in a bright finish and in body colour, and these are separate part numbers.
  • Count the fixing points and compare their positions with your own grille before buying.

What to look for in the photographs

A Part number — Moulded into the back of the frame, often near an edge. This is the number to match.
B Radar or camera mount — An opening, a bracket or a blanking panel behind the badge. Compare it with your own grille, because this is what varies most between trim levels.
C Clips and mounting tabs — The row of clips and tabs around the back edge. Count them and look for any that are broken.
D Badge mount — The seat the maker's badge fits into. The badge is a separate part.
E Slats and mesh — Look along the slats rather than at them, which shows a cracked or missing one that a flat photograph hides.
F Surround finish — The outer frame: bright, gloss black or body colour. The finish is part of what you are matching.

This section describes grilles parts in general. The numbers and the photographs above are this part.

Free next-day delivery in the United Kingdom Sent with DPD on a tracked, next-day service. Most mainland addresses are next day; the Highlands and Islands, Northern Ireland, the Channel Islands and the Isle of Man can take a day longer.

Returns Thirty days to change your mind, and we pay the return postage in the United Kingdom and Germany.

Trade and VAT C.E.J Haime Group Limited is VAT registered in England and Wales, and every order comes with a full VAT invoice.

Not sure it is the right part? Send us your registration or VIN and we will check this part number against your own vehicle before you buy.

Ask us about this part

Other part numbers on this site

See every Land Rover part number we list · All part numbers · Everything in stock now