NEW IVECO DAILY 2014 FRONT BRACKET STEEL LEFT SIDE GENUINE 5801512482

In stock now

We have part number 5801512482 in stock and ready to send, with free next-day delivery in the United Kingdom.

See the part and the current price

NEW IVECO DAILY 2014 FRONT BRACKET STEEL LEFT SIDE GENUINE 5801512482 - part number 5801512482

NEW IVECO DAILY 2014 FRONT BRACKET STEEL LEFT SIDE GENUINE 5801512482 - part number 5801512482 - view 2 NEW IVECO DAILY 2014 FRONT BRACKET STEEL LEFT SIDE GENUINE 5801512482 - part number 5801512482 - view 3 NEW IVECO DAILY 2014 FRONT BRACKET STEEL LEFT SIDE GENUINE 5801512482 - part number 5801512482 - view 4

The part we have in stock now.

About part number 5801512482

A front mounting bracket is a structural body support component that secures exterior panels, lights, or bumper assemblies to the main chassis of the vehicle. It attaches directly to the vehicle frame on the left-hand side and holds neighbouring components in their correct alignment. When this part is working correctly, the exterior panels fit neatly with even gaps, and there is no excessive vibration or looseness in the front bodywork while driving.

To ensure this is the correct part for your vehicle, you must check that your original part matches the part number 5801512482. On a steel bracket like this, the manufacturer number is usually stamped directly into the metal surface or printed on an attached label. Matching this exact number is the only way to guarantee correct fitment, as physical shapes and mounting points vary across different versions.

Mounting brackets are commonly replaced after a front-end impact, as steel can bend or crack, preventing other panels from aligning properly. Severe corrosion from road spray can also weaken the metal over time. When replacing a bracket, you will usually need fresh fixings such as bolts, nuts, or clips, and you may need to adjust the surrounding bodywork to restore proper alignment.

  • Part type: Other Exterior Parts & Accessories.
  • Specification: country of origin Italy.
  • Position on the vehicle: Left.

About this kind of part: brackets and mountings

A bracket is the moulded or pressed part that holds a panel, a lamp or a bumper to the body of the car. It is hidden once everything is assembled, and it is designed to break: the bracket is cheap and the panel it carries is not, so in a light knock the bracket gives way first and takes the energy. That is why a car with no visible damage often still needs them, and why they are replaced far more often than the parts they hold.

Why people replace one

  • A low-speed knock has snapped the bracket while leaving the panel it holds undamaged.
  • A panel sits proud, droops at one end, or has a gap that will not close, because the bracket behind it has cracked.
  • A rattle or a creak over bumps, where a broken bracket is letting a panel move against the body.
  • The bracket was broken during a previous repair, taking a bumper or a lamp off, and never replaced.
  • A lamp or a panel has been held on with tape, glue or a repair plate and the proper part is wanted.

Fitting it

  • Most brackets are reached only with the panel they carry removed, so the job is usually done at the same time as the panel comes off anyway.
  • They are held by screws, plastic nuts or clips into the body, and the fasteners are often broken on removal and worth having to hand.
  • A bracket sets the position of the panel in front of it, so the panel gaps are worth checking before everything is tightened down.
  • Where a bracket has snapped, look at the body mount behind it as well. The same knock often distorts the metal the bracket screws to.

Making sure it is the right one

  • Match the part number. Brackets are handed, and the two sides of a car take different numbers even where they look like mirror images.
  • A bracket is specific to the panel it carries and to the trim level, so one from a different version of the same model may locate in the body and still hold the panel in the wrong place.
  • Count the fixing points and compare their spacing with the broken part in front of you. This is the quickest check there is.
  • A repair plate is not the same part. If the original has snapped, the proper bracket restores the panel position; a plate holds it wherever it happens to sit.

What to look for in the photographs

A Part number — Moulded or stamped into the body of the bracket. This is the number to match, because handed parts look alike.
B Fixing points — The holes, slots and studs that screw to the body. Count them and compare the spacing with your own part.
C Locating pegs — The pins or tabs that set the panel's position. A sheared peg means the panel will sit wrong even though the bracket bolts up.
D Stress points — The narrow sections and the moulded ribs, where a bracket fails. Look at these rather than at the broad faces.
E Handing — Which way the arms and tabs face. Hold the photograph against your own part rather than judging by the overall shape.

This section describes brackets and mountings parts in general. The numbers and the photographs above are this part.

Free next-day delivery in the United Kingdom Sent with DPD on a tracked, next-day service. Most mainland addresses are next day; the Highlands and Islands, Northern Ireland, the Channel Islands and the Isle of Man can take a day longer.

Returns Thirty days to change your mind, and we pay the return postage in the United Kingdom and Germany.

Trade and VAT C.E.J Haime Group Limited is VAT registered in England and Wales, and every order comes with a full VAT invoice.

Not sure it is the right part? Send us your registration or VIN and we will check this part number against your own vehicle before you buy.

Ask us about this part

Other part numbers on this site

See every part number we list · All part numbers · Everything in stock now