RANGE ROVER EVOQUE L551 20'' 8J DIAMOND CUT ALLOY WHEEL R8D2-1007-FA | Part number R8D2FA
|
Part number R8D2FA. We take parts off vehicles every week, and this page is updated with a link straight to the part as soon as another one arrives. OUT OF STOCK In the meantime you can see every Land Rover part we have in stock, or you can send us a message and we will tell you the day one comes in. |
Notify me when this part is back in stockLeave your email address and we will write to you the day part number R8D2FA comes in. We use your address for that message only. |

The last part of this number we had in stock.
About part number R8D2FAAn alloy wheel is a structural component of the vehicle exterior and suspension system. It mounts directly onto the wheel hub and holds the tyre in place, transferring power, steering inputs, and braking forces to the road surface. When the wheel is correctly fitted and balanced, the driver experiences smooth, stable handling, minimal vibration through the steering wheel, and reliable road holding. To confirm that this wheel is the correct replacement for your vehicle, you must check the part number stamped directly onto the item. Original manufacturer part numbers are typically cast or engraved into the rear face of the wheel, around the central mounting hub, or inside one of the spokes. You must match the part number R8D2FA exactly, as matching this number is what determines correct fitment. When fitting a replacement alloy wheel, a person commonly needs a new tyre, a replacement air valve, and a set of balancing weights. Alloy wheels are usually replaced due to kerb damage, severe cosmetic corrosion, or structural cracks and bends caused by impacts with potholes or road debris.
|
About this kind of part: alloy wheelsAn alloy wheel is a cast or forged aluminium wheel. Four numbers describe it and all four have to match the car: the diameter in inches, the rim width in inches followed by the letter J, the number of bolt holes with the circle they sit on in millimetres, and the offset, marked ET, which is how far the mounting face sits from the centre line. A casting number is marked on the back of the spokes or inside the rim, and that number is what identifies the exact wheel rather than one that merely looks the same. Why people replace one
Fitting it
Making sure it is the right one
What to look for in the photographs
This section describes alloy wheels parts in general. The numbers and the photographs above are this part. |
Parts we have that go with this oneMost repairs need more than one part, and these came off the same area of the vehicle. Each has its own page, which says whether we have one in stock today.
|
|
Free next-day delivery in the United Kingdom Sent with DPD on a tracked, next-day service. Most mainland addresses are next day; the Highlands and Islands, Northern Ireland, the Channel Islands and the Isle of Man can take a day longer. Returns Thirty days to change your mind, and we pay the return postage in the United Kingdom and Germany. Trade and VAT C.E.J Haime Group Limited is VAT registered in England and Wales, and every order comes with a full VAT invoice. Not sure it is the right part? Send us your registration or VIN and we will check this part number against your own vehicle before you buy. |