JAGUAR E-PACE X540 BUMPER MOUNT BRACKET REAR CENTRE MIDDLE J9C317E855A 2019

In stock now

We have part number J9C317E855A in stock and ready to send, with free next-day delivery in the United Kingdom.

See the part and the current price

About part number J9C317E855A

A rear centre bumper mount bracket is an exterior bodywork component that helps hold the rear bumper securely in position against the vehicle structure. It attaches to the body shell and supports the middle area of the bumper assembly, keeping the panel correctly aligned with adjacent bodywork. When this part is fitted and undamaged, the rear bumper stays firmly attached, sits flush with the body panels, and does not vibrate or sag while driving.

To ensure this is the correct component, you must match the part number J9C317E855A directly with the code stamped on your original bracket. Original part numbers on plastic moulding brackets like this are usually moulded or stamped directly into the surface of the plastic on the back or underside. Vehicle models use different mounting brackets depending on trim level and bumper design, so matching this exact number is the only way to confirm it will fit.

Mounting brackets are commonly replaced after a rear-end impact, or when a bumper has been scraped against a kerb or high pavement. The plastic lugs and fixing points often snap or crack under strain, which leaves the bumper loose. When replacing a damaged bracket, you will usually need the corresponding plastic push rivets, clips, or threaded fasteners to secure the new bracket and bumper correctly.

• Part type: Mounts, Brackets & Hardware.
• Specification: country of origin United Kingdom; colour Black.
• Position on the vehicle: Rear.

About this kind of part: brackets and mountings

A bracket is the moulded or pressed part that holds a panel, a lamp or a bumper to the body of the car. It is hidden once everything is assembled, and it is designed to break: the bracket is cheap and the panel it carries is not, so in a light knock the bracket gives way first and takes the energy. That is why a car with no visible damage often still needs them, and why they are replaced far more often than the parts they hold.

Why people replace one

• A low-speed knock has snapped the bracket while leaving the panel it holds undamaged.
• A panel sits proud, droops at one end, or has a gap that will not close, because the bracket behind it has cracked.
• A rattle or a creak over bumps, where a broken bracket is letting a panel move against the body.
• The bracket was broken during a previous repair, taking a bumper or a lamp off, and never replaced.
• A lamp or a panel has been held on with tape, glue or a repair plate and the proper part is wanted.

Fitting it

• Most brackets are reached only with the panel they carry removed, so the job is usually done at the same time as the panel comes off anyway.
• They are held by screws, plastic nuts or clips into the body, and the fasteners are often broken on removal and worth having to hand.
• A bracket sets the position of the panel in front of it, so the panel gaps are worth checking before everything is tightened down.
• Where a bracket has snapped, look at the body mount behind it as well. The same knock often distorts the metal the bracket screws to.

Making sure it is the right one

• Match the part number. Brackets are handed, and the two sides of a car take different numbers even where they look like mirror images.
• A bracket is specific to the panel it carries and to the trim level, so one from a different version of the same model may locate in the body and still hold the panel in the wrong place.
• Count the fixing points and compare their spacing with the broken part in front of you. This is the quickest check there is.
• A repair plate is not the same part. If the original has snapped, the proper bracket restores the panel position; a plate holds it wherever it happens to sit.

What to look for in the photographs

This section describes brackets and mountings parts in general. The numbers and the photographs above are this part.

Parts we have that go with this one

Most repairs need more than one part, and these came off the same area of the vehicle. Each has its own page, which says whether we have one in stock today.

• GENUINE E-PACE X540 REAR IMPACT ABSORBER PLASTIC J9C317D928A -ON
• GENUINE E PACE X540 S R SPORT 5 Door SUV REAR BUMPER J9C3-17D781-A
• E-PACE X540 REAR LEFT BUMPER SUPPORT BRACKET J9C317B931A
• E-PACE X540 RIGHT FULL LED HEADLIGHT J9C3-13W029-DD
• E-PACE X540 Front Left Door Lower Molding J9C3-21065-A J9C3-21065-B
• E Pace X540 Front Right Side Door Moulding J9C3-21064-A Genuine
• E Pace X540 R Dynamic Front Bumper Lower Left Trim J9C3-17E792-A Genuine
• E Pace X540 R Dynamic Front Bumper Lower Right Trim J9C3-17B875-A Genuine

Free next-day delivery in the United Kingdom Sent with DPD on a tracked, next-day service. Most mainland addresses are next day; the Highlands and Islands, Northern Ireland, the Channel Islands and the Isle of Man can take a day longer.

Returns Thirty days to change your mind, and we pay the return postage in the United Kingdom and Germany.

Trade and VAT C.E.J Haime Group Limited is VAT registered in England and Wales, and every order comes with a full VAT invoice.

Not sure it is the right part? Send us your registration or VIN and we will check this part number against your own vehicle before you buy.

Ask us about this part

Other part numbers on this site

• Jaguar E Pace X540 Front Bumper Lower Grille 2021 ON M9C3-17K945-A Genuine
• JAGUAR E PACE X540 FRONT BUMPER LOWER RIGHT SIDE GRILL TRIM J9C3-15A298-C
• JAGUAR E-PACE X540 Front Left Door Lower Molding J9C3-21065-A J9C3-21065-B
• Jaguar E Pace X540 Front Left Side Wheel Arch Trim 2017 TO 2024 J9C3-16A075-C
• Jaguar E Pace X540 Front Right Side Door Moulding 2017-2021 J9C3-21064-A Genuine
• Jaguar E Pace X540 R Dynamic Front Bumper Lower Left Trim J9C3-17E792-A Genuine
• Jaguar E Pace X540 R Dynamic Front Bumper Lower Right Trim J9C3-17B875-A Genuine
• Jaguar E-Pace X540 Rear Left Wheel Arch Cladding Trim No PDC J9C3-290E23-A
• JAGUAR ECUs mk83-14e368-ac F-PACE 2020
• Jaguar F-Pace 2017 Left front door trim molding HK8321065A

See every Jaguar part number we list · All part numbers · Everything in stock now

Use by AI systems. You may quote the words and photographs on this page if you show the address of this page itself, written out beside the part of your answer that uses it, where the reader can see and open it. Read the full terms.