Land Rover Defender Left Lower Door Moulding Trim 2020 ON L8B2-21065-A Genuine
|
In stock now We have part number L8B2-21065-A in stock and ready to send, with free next-day delivery in the United Kingdom. |

![]() |
![]() |
![]() |
The part we have in stock now.
About part number L8B2-21065-AA door moulding trim is an exterior body panel component that fits onto the lower outer section of the door on the left-hand side. It protects the lower door shell from road debris, stone chips, and light impacts, while providing a finished appearance to the side profile of the vehicle. When the trim is correctly fitted, the driver will notice clean bodylines, reduced panel vibration, and a neat alignment with the surrounding exterior bodywork. To confirm that this component is correct for your vehicle, you must check the part number L8B2-21065-A matches the number printed or stamped onto your original unit. You may also find the secondary number FFF22122527 marked on the part. Part numbers on plastic body mouldings are typically moulded directly into the reverse side of the trim. Matching these numbers is the only way to ensure correct fitment, as vehicle models use different trim designs. A moulding trim is usually replaced due to cosmetic damage, such as deep scratches, cracks, or missing sections caused by kerb scrapes and parking impacts. Because this replacement item requires a respray to match your vehicle colour, a buyer will commonly need suitable body paint, primer, and clear coat, alongside replacement plastic fixing clips if the original fasteners broke during removal.
|
About this kind of part: trim mouldingsA trim moulding is a long, narrow strip that finishes an edge or a joint on the outside of a car: a door moulding, a sill cover, a wheel arch trim, a window finisher or a roof strip. Most are plastic, either painted to match the body or supplied in a textured black or a bright finish, and they clip to studs or to double-sided tape. They are cosmetic rather than structural, but they also cover the panel joint underneath, so a missing one leaves a gap where water and grit collect. Why people replace one
Fitting it
Making sure it is the right one
What to look for in the photographs
This section describes trim mouldings parts in general. The numbers and the photographs above are this part. |
Parts we have that go with this oneMost repairs need more than one part, and these came off the same area of the vehicle. Each has its own page, which says whether we have one in stock today.
|
|
Free next-day delivery in the United Kingdom Sent with DPD on a tracked, next-day service. Most mainland addresses are next day; the Highlands and Islands, Northern Ireland, the Channel Islands and the Isle of Man can take a day longer. Returns Thirty days to change your mind, and we pay the return postage in the United Kingdom and Germany. Trade and VAT C.E.J Haime Group Limited is VAT registered in England and Wales, and every order comes with a full VAT invoice. Not sure it is the right part? Send us your registration or VIN and we will check this part number against your own vehicle before you buy. |


