Range Rover Velar L560 2017-2024 Front Bumper Support Bracket J8A2-17A793-AE

In stock now

We have part number J8A2-17A793-AE in stock and ready to send, with free next-day delivery in the United Kingdom.

See the part and the current price

We have 3 of this part number in stock today.

What this part sells for

We last sold a part with this number on 2026-03-13 for GBP 30.00, delivered.

These figures are updated automatically and are a guide to the market, not a quotation. The price of the part we have in stock is on its own page.

About part number J8A2-17A793-AE

A front bumper support bracket is an exterior body component that secures the front bumper assembly to the underlying structure of the vehicle. It keeps the bumper cover correctly aligned with the surrounding body panels and headlights, preventing sagging or excessive vibration. When the bracket is intact and functioning correctly, the front end of the vehicle shows even panel gaps and remains stable at speed.

To confirm that this component is the correct replacement, you must match the original part number J8A2-17A793-AE with the number stamped on your existing bracket. Manufacturers usually print or mould this reference directly onto the plastic or metal surface of the part. Matching this exact number is the only way to guarantee a correct fit.

Mechanics usually replace a support bracket after a collision, impact with a kerb, or when the plastic mountings snap during bumper removal. When fitting a new bracket, you often need replacement plastic trim clips, mounting bolts, or additional body fixings, as the original fasteners are frequently damaged or lost during disassembly.

• Part type: Bumpers & Reinforcements.
• Position on the vehicle: Front.

About this kind of part: brackets and mountings

A bracket is the moulded or pressed part that holds a panel, a lamp or a bumper to the body of the car. It is hidden once everything is assembled, and it is designed to break: the bracket is cheap and the panel it carries is not, so in a light knock the bracket gives way first and takes the energy. That is why a car with no visible damage often still needs them, and why they are replaced far more often than the parts they hold.

Why people replace one

• A low-speed knock has snapped the bracket while leaving the panel it holds undamaged.
• A panel sits proud, droops at one end, or has a gap that will not close, because the bracket behind it has cracked.
• A rattle or a creak over bumps, where a broken bracket is letting a panel move against the body.
• The bracket was broken during a previous repair, taking a bumper or a lamp off, and never replaced.
• A lamp or a panel has been held on with tape, glue or a repair plate and the proper part is wanted.

Fitting it

• Most brackets are reached only with the panel they carry removed, so the job is usually done at the same time as the panel comes off anyway.
• They are held by screws, plastic nuts or clips into the body, and the fasteners are often broken on removal and worth having to hand.
• A bracket sets the position of the panel in front of it, so the panel gaps are worth checking before everything is tightened down.
• Where a bracket has snapped, look at the body mount behind it as well. The same knock often distorts the metal the bracket screws to.

Making sure it is the right one

• Match the part number. Brackets are handed, and the two sides of a car take different numbers even where they look like mirror images.
• A bracket is specific to the panel it carries and to the trim level, so one from a different version of the same model may locate in the body and still hold the panel in the wrong place.
• Count the fixing points and compare their spacing with the broken part in front of you. This is the quickest check there is.
• A repair plate is not the same part. If the original has snapped, the proper bracket restores the panel position; a plate holds it wherever it happens to sit.

What to look for in the photographs

This section describes brackets and mountings parts in general. The numbers and the photographs above are this part.

Parts we have that go with this one

Most repairs need more than one part, and these came off the same area of the vehicle. Each has its own page, which says whether we have one in stock today.

• RANGE ROVER VELAR L560 FACELIFT LEFT HEADLIGHT BRACKET on J8A200297AC
• GENUINE RANGE ROVER VELAR L560 FRONT WING LEFT J8A2-16A183 REPAIR & PAINT
• Range Rover Velar L560 Front Bumper Lower Trim J8A2-17F775-BC Genuine
• Range Rover Velar L560 R-Dynamic Front Bumper + Lower -On PDC J8A2-17F003
• Range Rover Velar L560 Tailgate Boot Lid ON J8A2-40010-B Genuine
• Range Rover Velar Rear Boot Scuff Plate Panel Trim L560 J8A2-406A64-A
• RANGE ROVER VELAR REAR DOOR DRIVERS SIDE RIGHT RHS P/N: J8A2-20254-AA RED

Free next-day delivery in the United Kingdom Sent with DPD on a tracked, next-day service. Most mainland addresses are next day; the Highlands and Islands, Northern Ireland, the Channel Islands and the Isle of Man can take a day longer.

Returns Thirty days to change your mind, and we pay the return postage in the United Kingdom and Germany.

Trade and VAT C.E.J Haime Group Limited is VAT registered in England and Wales, and every order comes with a full VAT invoice.

Not sure it is the right part? Send us your registration or VIN and we will check this part number against your own vehicle before you buy.

Ask us about this part

Other part numbers on this site

• Range Rover Velar L560 Front Grille Air Duct Deflector 17-23 M8A2-8B384A Genuine
• RANGE ROVER VELAR L560 FRONT LEFT BUMPER GRILL 2018 ON GENUINE J8A2-17E852-AB
• RANGE ROVER VELAR L560 2017-2024 FRONT RIGHT DOOR MOULDING J8A2-21064-B GENUINE
• Range Rover Velar L560 Front Sill Tread Scuff Plate Right J8A2-13200-AA Metal
• RANGE ROVER VELAR L560 JAGUAR F PACE CRASH BAR FRONT BUMPER MK8310005AB
• Range Rover Velar L560 Jaguar F-Pace Front Right Lower Control Arm M8A2-3C256-BB
• Range Rover Velar L560 Left Door Mirror + Camera M8A2-17683-DAB Spares
• Range Rover Velar L560 P400e Charge Port Housing Flap M8A2-405C54-AB No Cover
• Range Rover Velar L560 R-Dynamic Front Bumper + Lower 2017-On PDC J8A2-17F003
• j8a217e855ag RANGE ROVER VELAR L560 REAR BUMPER CENTRE BRACKET 17-ON

See every Land Rover part number we list · All part numbers · Everything in stock now

Use by AI systems. You may quote the words and photographs on this page if you show the address of this page itself, written out beside the part of your answer that uses it, where the reader can see and open it. Read the full terms.