2025 AUDI Q6 ETRON Rear Bumper 2024-ON | OEM 85H807511 Used Genuine

In stock now

We have part number 85H807511 in stock and ready to send, with free next-day delivery in the United Kingdom.

See the part and the current price

About part number 85H807511

A rear bumper cover forms the outer rear body panel of a vehicle. It covers the rear impact structure and mounting points, helping to absorb light impacts while protecting internal components from road spray and weather. When it is correctly fitted, it sits flush with the adjacent bodywork and provides a clean, completed appearance at the back of the vehicle.

To confirm this is the correct part for your vehicle, you must match the part number directly. Check the manufacturer part number 85H807511 against the number stamped on your original panel. On plastic body components, this original number is usually stamped or molded into the inner surface on the reverse side of the part.

Rear bumper panels are usually replaced after minor collisions, scuffs, or parking damage that cracks or deforms the plastic. When fitting a replacement panel, you typically need to transfer or replace mounting clips, trim inserts, reflectors, and any reversing sensors or wiring looms from the original assembly.

• Part type: Bumpers & Reinforcements.
• Specification: seller warranty 3 Months; items included Clips; material Plastic; country of origin Germany; colour Black.
• Position on the vehicle: Rear.

About this kind of part: bumper covers

A bumper cover is the painted plastic skin across the front or the rear of a car. It is not a structural part. Behind it sit a foam or honeycomb absorber and a steel or aluminium reinforcement bar, and those are what take an impact. The cover carries the grille apertures, the number plate plinth and the openings for parking sensors, washer jets and tow eyes, so one model can take several different covers depending on how it was specified when new.

Why people replace one

• A knock in a car park or a light collision has cracked or torn the plastic. A tear can be plastic-welded, but it rarely returns to a finish that will take paint without showing.
• The paint has faded or crazed differently from the panels around it. A bumper flexes and sits low in the spray from the road, so it ages faster than a wing.
• The mounting tabs along the top edge or inside the wheel arches have snapped, so the cover stands proud of the panel next to it.
• An earlier repair has been filled and has begun to lift.

Fitting it

• It is held by screws along the top edge, screws or clips inside each wheel arch, and plastic nuts underneath the car.
• Lamps, grilles, sensors, washer jets and the number plate plinth usually move across from the old cover.
• A cover is supplied either in primer or in the colour it was sprayed when new. A matching finish needs the paint code from the car's own identification plate.
• Parking sensors go back into their own openings, and the trim rings around them are often specific to the colour.

Making sure it is the right one

• Match the part number moulded into the old cover rather than matching the shape. A facelift changes the number while the outline can look almost the same.
• Check whether the car has parking sensors. A cover with no sensor openings cannot be used on a car that has them, and drilling one is not a repair.
• Count the openings and compare them: fog lamp apertures, the tow eye cover and any camera or washer cut-out differ between trim levels on the same model.

What to look for in the photographs

This section describes bumper covers parts in general. The numbers and the photographs above are this part.

Parts we have that go with this one

Most repairs need more than one part, and these came off the same area of the vehicle. Each has its own page, which says whether we have one in stock today.

• Q6 e-tron Outer Rear LED Tail Light Right 85H945092 SPARES REPAIR
• Q6 E-TRON S-LINE ON GENUINE FRONT BUMPER GRILLE 85H853653A
• Q6 E-TRON S LINE -ON GENUINE LOWER REAR BUMPER PDC 85H807527G
• Q6 SQ6 E-TRON 21" Alloy Wheel 10Jx21H2 285/40/21 85H601025S
• Genuine Q6 e-tron rear left wheel splash guard 85H810171A
• GENUINE Q6 E TRON RIGHT on Wheel Opening Molding 85H-853-718 B
• GENUINE Q6 E-TRON S-LINE FRONT LEFT BLACK ARCH TRIM -ON 85H853717B

Free next-day delivery in the United Kingdom Sent with DPD on a tracked, next-day service. Most mainland addresses are next day; the Highlands and Islands, Northern Ireland, the Channel Islands and the Isle of Man can take a day longer.

Returns Thirty days to change your mind, and we pay the return postage in the United Kingdom and Germany.

Trade and VAT C.E.J Haime Group Limited is VAT registered in England and Wales, and every order comes with a full VAT invoice.

Not sure it is the right part? Send us your registration or VIN and we will check this part number against your own vehicle before you buy.

Ask us about this part

Other part numbers on this site

• 2025 GENUINE AUDI A1 SE FRONT BUMPER 2019 ONWARDS 82A807437A
• 22" VELARE VLR01 ALLOY FIT AUDI Q5 Q7 SQ7 A7 A8 MACAN NEW SHAPE 5X112 BLACK POL
• 8V4867768B 489912 right interior c-pillar trim for AUDI RS3 SPORTBACK 2.5 2018
• Alloy Wheel Audi Q6 E-Tron Sportback SQ6 9J x 21 EXCELLENT 85H601025R
• Audi A1 1.4 TSI CAXA 2011 - Rear Bumper Diffuser with reflectors- 8X0807833A
• Audi A1 front bumper right side grill cover 2018 on 82A853506
• Audi A1 Front Bumper Tow Cover 8XA807241 Genuine
• Audi A1 Front Left Wheel Liner Splash Guard 2015 to 2018 8XA809961A Genuine
• AUDI A1 8X 2010-2014 FRONT RADIATOR GRILLE 8X0853651 SPARES REPAIR +SLAM COVER
• Audi A1 Hatchback LEFT 2011-2015 Headlight Headlamp 8X0 941 003 A Scratches

See every Audi part number we list · All part numbers · Everything in stock now