GENUINE RANGE ROVER SPORT 23" 9.5J ALLOY WHEEL L461 M8E21007LA | Part number M8E21007DC
|
Part number M8E21007DC. We take parts off vehicles every week, and this page is updated with a link straight to the part as soon as another one arrives. OUT OF STOCK In the meantime you can see every Land Rover part we have in stock, or you can send us a message and we will tell you the day one comes in. |
Notify me when this part is back in stockLeave your email address and we will write to you the day part number M8E21007DC comes in. We use your address for that message only. |

The last part of this number we had in stock.
About part number M8E21007DCAn alloy wheel forms the main metal structure that holds the tyre and connects the vehicle to the road hub. Mounted directly to the wheel hub using wheel bolts or nuts, it supports the weight of the vehicle and allows the road tyre to maintain proper contact with the surface. When a wheel is undamaged and balanced correctly, the driver experiences a smooth ride with accurate steering response and no unwanted vibration through the steering wheel or chassis. To ensure this is the correct replacement wheel, you must match the part number M8E21007DC exactly with the number stamped on your original item. On parts of this type, the part number is usually cast or stamped into the rear face of the wheel spokes, or around the inner hub mounting face. Matching this specific number is the only way to guarantee correct fitment, diameter, width, and offset for your vehicle. A wheel like this is commonly replaced due to impact damage, such as hitting a pothole or kerb, which can cause severe scuffing, cracking, or structural buckling that prevents the tyre from sealing properly. When replacing a wheel, you will typically require a suitable road tyre, a replacement air valve or tyre pressure monitoring sensor, and fresh wheel weights to balance the assembly correctly before fitting it back onto the vehicle.
|
About this kind of part: alloy wheelsAn alloy wheel is a cast or forged aluminium wheel. Four numbers describe it and all four have to match the car: the diameter in inches, the rim width in inches followed by the letter J, the number of bolt holes with the circle they sit on in millimetres, and the offset, marked ET, which is how far the mounting face sits from the centre line. A casting number is marked on the back of the spokes or inside the rim, and that number is what identifies the exact wheel rather than one that merely looks the same. Why people replace one
Fitting it
Making sure it is the right one
What to look for in the photographs
This section describes alloy wheels parts in general. The numbers and the photographs above are this part. |
|
Free next-day delivery in the United Kingdom Sent with DPD on a tracked, next-day service. Most mainland addresses are next day; the Highlands and Islands, Northern Ireland, the Channel Islands and the Isle of Man can take a day longer. Returns Thirty days to change your mind, and we pay the return postage in the United Kingdom and Germany. Trade and VAT C.E.J Haime Group Limited is VAT registered in England and Wales, and every order comes with a full VAT invoice. Not sure it is the right part? Send us your registration or VIN and we will check this part number against your own vehicle before you buy. |