PEUGEOT 208 GT (P21) FACELIFT ab 2023 STOßSTANGENHALTER VORNE LINKS 9855781280

Teilenummer 9855781280. Wir bauen jede Woche Teile aus Fahrzeugen aus, und diese Seite wird mit einem direkten Link zum Teil aktualisiert, sobald wieder eines eintrifft.

NICHT MEHR AUF LAGER

In der Zwischenzeit können Sie sehen Alle Peugeot-Ersatzteile auf Lager, oder Sie können senden Sie uns eine Nachricht und wir informieren Sie an dem Tag, an dem eines eintrifft.

Benachrichtigen, wenn dieses Teil wieder auf Lager ist

Hinterlassen Sie Ihre E-Mail-Adresse und wir schreiben Ihnen an dem Tag, an dem die Teilenummer 9855781280 eintrifft. Wir verwenden Ihre Adresse ausschließlich für diese Nachricht.

Informationen zur Teilenummer 9855781280

A front bumper bracket is a structural mounting component that secures the front bumper cover to the body shell of the vehicle. It sits behind the outer bumper casing on the left-hand side, keeping the bumper correctly aligned with the surrounding bodywork, wings and lighting assemblies. When the bracket is intact and functioning correctly, the front bumper remains firmly attached without loose edges, uneven panel gaps or vibration while driving.

To confirm that this item is correct for your vehicle, you must match part number 9855781280 exactly against the code stamped into your original unit. On a plastic or metal bracket like this, the manufacturer part number is usually moulded, stamped or printed directly onto the main surface of the body. Vehicle fitment is determined entirely by matching this number, so do not rely on vehicle model names or production years alone.

These brackets are most commonly replaced following low-speed impacts, parking scuffs or front-end collisions that snap the plastic retention tabs or distort the mounting points. When fitting a replacement bracket, you will typically require the original mounting screws, clips or plastic push-rivets to secure it, along with any adjacent fixings that may have been damaged during the original impact or removal process.

About this kind of part: brackets and mountings

A bracket is the moulded or pressed part that holds a panel, a lamp or a bumper to the body of the car. It is hidden once everything is assembled, and it is designed to break: the bracket is cheap and the panel it carries is not, so in a light knock the bracket gives way first and takes the energy. That is why a car with no visible damage often still needs them, and why they are replaced far more often than the parts they hold.

Why people replace one

  • A low-speed knock has snapped the bracket while leaving the panel it holds undamaged.
  • A panel sits proud, droops at one end, or has a gap that will not close, because the bracket behind it has cracked.
  • A rattle or a creak over bumps, where a broken bracket is letting a panel move against the body.
  • The bracket was broken during a previous repair, taking a bumper or a lamp off, and never replaced.
  • A lamp or a panel has been held on with tape, glue or a repair plate and the proper part is wanted.

Fitting it

  • Most brackets are reached only with the panel they carry removed, so the job is usually done at the same time as the panel comes off anyway.
  • They are held by screws, plastic nuts or clips into the body, and the fasteners are often broken on removal and worth having to hand.
  • A bracket sets the position of the panel in front of it, so the panel gaps are worth checking before everything is tightened down.
  • Where a bracket has snapped, look at the body mount behind it as well. The same knock often distorts the metal the bracket screws to.

Making sure it is the right one

  • Match the part number. Brackets are handed, and the two sides of a car take different numbers even where they look like mirror images.
  • A bracket is specific to the panel it carries and to the trim level, so one from a different version of the same model may locate in the body and still hold the panel in the wrong place.
  • Count the fixing points and compare their spacing with the broken part in front of you. This is the quickest check there is.
  • A repair plate is not the same part. If the original has snapped, the proper bracket restores the panel position; a plate holds it wherever it happens to sit.

What to look for in the photographs

A Teilenummer — Moulded or stamped into the body of the bracket. This is the number to match, because handed parts look alike.
B Fixing points — The holes, slots and studs that screw to the body. Count them and compare the spacing with your own part.
C Locating pegs — The pins or tabs that set the panel's position. A sheared peg means the panel will sit wrong even though the bracket bolts up.
D Stress points — The narrow sections and the moulded ribs, where a bracket fails. Look at these rather than at the broad faces.
E Handing — Which way the arms and tabs face. Hold the photograph against your own part rather than judging by the overall shape.

This section describes brackets and mountings parts in general. The numbers and the photographs above are this part.

Kostenlose Lieferung am nächsten Werktag in Großbritannien Versand mit DPD mit Sendungsverfolgung und Zustellung am nächsten Werktag. Die meisten Adressen auf dem Festland werden am nächsten Tag beliefert; die Highlands und Inseln, Nordirland, die Kanalinseln und die Isle of Man können einen Tag länger dauern.

Rückgaben 30 Tage Widerrufsrecht, und wir tragen die Rücksendekosten in Großbritannien und Deutschland.

Gewerbe und MwSt. C.E.J Haime Group Limited ist in England und Wales umsatzsteuerlich registriert, und zu jeder Bestellung erhalten Sie eine ordnungsgemäße Rechnung mit ausgewiesener MwSt.

Nicht sicher, ob es das passende Teil ist? Senden Sie uns Ihr Kennzeichen oder Ihre Fahrgestellnummer (FIN) und wir prüfen diese Teilenummer für Ihr Fahrzeug, bevor Sie kaufen.

Frage zu diesem Teil stellen

Weitere Teilenummern auf dieser Seite

Alle von uns gelisteten Peugeot-Teilenummern anzeigen · Alle Teilenummern · Alles jetzt auf Lager