VOLKSWAGEN GOLF MK7 KOTFLÜGELINNENVERKLEIDUNG VORNE LINKS 5G0805977C 2015

Teilenummer 5G0805977C. Wir bauen jede Woche Teile aus Fahrzeugen aus, und diese Seite wird mit einem direkten Link zum Teil aktualisiert, sobald wieder eines eintrifft.

NICHT MEHR AUF LAGER

In der Zwischenzeit können Sie sehen alle Volkswagen-Ersatzteile auf Lager, oder Sie können senden Sie uns eine Nachricht und wir informieren Sie an dem Tag, an dem eines eintrifft.

Benachrichtigen, wenn dieses Teil wieder auf Lager ist

Hinterlassen Sie Ihre E-Mail-Adresse und wir schreiben Ihnen an dem Tag, an dem die Teilenummer 5G0805977C eintrifft. Wir verwenden Ihre Adresse ausschließlich für diese Nachricht.

Informationen zur Teilenummer 5G0805977C

A front wheel arch liner is a protective plastic cover fitted inside the wing of a vehicle. It forms part of the bodywork and trim system, shielding the inner wing, suspension components, and electrical wiring from road debris, water, mud, and salt. When intact, it prevents rust in the engine bay and reduces road noise while driving.

To confirm that this part is correct for your vehicle, check that the original part number matches 5G0805977C exactly. On a plastic liner like this, the manufacturer part number is typically stamped or moulded directly into the plastic on the inner face that faces towards the bodywork. Matching this number is the only way to guarantee a correct fit.

Replacing a wheel arch liner is usually necessary after it has been torn or cracked by road debris, damaged in a light collision, or lost during a tyre blowout. When replacing this part, you will usually need a set of plastic trim clips, screws, or fixings, as the original fasteners often break or go missing during removal.

About this kind of part: wheel arch liners

A wheel arch liner is the moulded plastic or felted shell inside a wheel arch that keeps water, salt and stones off the inner wing, the suspension and the wiring. It is hidden and it is not structural, but it is the part that decides whether the metal behind it rusts, so a missing or torn liner is a slow problem rather than a cosmetic one. Mudflaps, undertrays and the air ducts that feed the brakes are the same kind of part doing the same job elsewhere under the car.

Why people replace one

  • The liner has torn away from its clips, usually after a wheel has picked it up at speed, and it now rubs the tyre.
  • Road debris or a kerb has split the liner along an edge.
  • The clips and screws have rusted away or pulled through, so the liner hangs down and catches.
  • The liner was removed for a repair and never refitted, which leaves the inner wing exposed.
  • A felted liner has become waterlogged and heavy and has pulled itself off its fixings.

Fitting it

  • The wheel normally has to come off, and the car must be supported properly on axle stands rather than a jack alone.
  • A liner is held by a mixture of plastic screws, clips and expanding rivets around its edge, and most of them break on removal, so a set of fixings is worth having before starting.
  • Fit the fixings loosely around the whole edge first and tighten them afterwards, otherwise the last few holes will not line up.
  • With the liner out, it is worth looking at the metal behind it. A liner that has been missing for a while has usually exposed something worth seeing.

Making sure it is the right one

  • Match the part number moulded into the liner. Front and rear differ, the two sides differ, and a model with wider arches takes a different part again.
  • Count the fixing holes and compare their positions with the old liner. This is the quickest way to tell two similar liners apart.
  • Check whether yours has cut-outs or ducts for brake cooling, a sensor or a washer line. These vary by specification.
  • Compare the material. The same position is made as hard plastic on one version and as a felted shell on another, and they use different fixings.

What to look for in the photographs

A Teilenummer — Moulded into the inner face. It is often the only difference between two liners that look the same.
B Fixing holes — The holes, slots and rivet points around the edge. Count them and compare the spacing with your own liner.
C Cut-outs and ducts — Any opening for brake cooling, a sensor or a washer line. These vary by specification and are part of the match.
D Edge condition — Look along the whole rim, particularly where the fixings pass through. This is where a liner tears out.
E Material — Hard plastic or a felted shell. They are not interchangeable and they take different fixings.

This section describes wheel arch liners parts in general. The numbers and the photographs above are this part.

Kostenlose Lieferung am nächsten Werktag in Großbritannien Versand mit DPD mit Sendungsverfolgung und Zustellung am nächsten Werktag. Die meisten Adressen auf dem Festland werden am nächsten Tag beliefert; die Highlands und Inseln, Nordirland, die Kanalinseln und die Isle of Man können einen Tag länger dauern.

Rückgaben 30 Tage Widerrufsrecht, und wir tragen die Rücksendekosten in Großbritannien und Deutschland.

Gewerbe und MwSt. C.E.J Haime Group Limited ist in England und Wales umsatzsteuerlich registriert, und zu jeder Bestellung erhalten Sie eine ordnungsgemäße Rechnung mit ausgewiesener MwSt.

Nicht sicher, ob es das passende Teil ist? Senden Sie uns Ihr Kennzeichen oder Ihre Fahrgestellnummer (FIN) und wir prüfen diese Teilenummer für Ihr Fahrzeug, bevor Sie kaufen.

Frage zu diesem Teil stellen

Weitere Teilenummern auf dieser Seite

Alle von uns gelisteten Volkswagen-Teilenummern anzeigen · Alle Teilenummern · Alles jetzt auf Lager