2024 PEUGEOT 2008 TAIL LIGHT LAMP LEFT Hatchback 2019-2024 | Part number 9850449780

In stock now

We have part number 9850449780 in stock and ready to send, with free next-day delivery in the United Kingdom.

See the part and the current price

About part number 9850449780

A rear tail light assembly is an exterior lighting component mounted at the back corner of a vehicle. It contains lamps that signal your presence to trailing drivers, including rear position lights, brake lights, and direction indicators. When functioning correctly, it illuminates clearly at night and responds instantly to pedal or switch inputs, helping to keep the vehicle visible and safe on the road.

To confirm that this component is correct for your vehicle, you must match the manufacturer part number directly. Check the original housing removed from your car, as part numbers are typically stamped or printed on the rear plastic casing or near the mounting studs. Matching the number 9850449780 is the only way to ensure correct fitment, electrical connection, and outer shape.

These units are usually replaced after sustaining physical damage from minor collisions, cracked lenses that let in moisture, or internal electrical failures. When installing a replacement light, you may need extra fixing clips, fresh sealing gaskets, or replacement bulbs and holders if they are not transferred from your original unit.

• Part type: Rear Light Assemblies.
• Specification: condition and options Mk2 Outer; country of origin France.

About this kind of part: rear lamps

A rear lamp holds several separate functions in one housing: the tail light, the brake light, the indicator, the reversing light and the rear fog light. On most cars one lamp carries the reversing light and the other carries the rear fog light, so the two sides are not mirror images of each other in what they actually do. The light source is a bulb or a set of light-emitting diodes, and a diode lamp cannot be converted to bulbs.

Why people replace one

• The lens has cracked, usually from a knock while reversing, and water has got into the housing.
• The red lens has faded to pink where it has stood in the sun, which shows most on an older car.
• A diode section has gone dark in patches, which cannot be repaired because the diodes are sealed into the unit.
• The housing is sound but a mounting stud or lug has broken, so the lamp no longer pulls up tight against its seal and lets water past.
• Condensation sits inside after rain, because a bulb holder seal or a breather has perished.

Fitting it

• Most rear lamps are reached from inside the boot or the tailgate aperture, behind a trim panel or a removable cover.
• The lamp is held by two or three nuts on studs and then pulls straight back out of its locating pegs.
• The foam or rubber seal around the back of the lamp is what keeps water out of the boot. If it has hardened, water will find its way in whatever else is done.
• On a car with diode lamps the car may watch the current drawn by each function, so a mismatched unit can log a fault.

Making sure it is the right one

• Match the part number, not the side of the car. The reversing light and the rear fog light sit on opposite sides, and markets that drive on the left put them the other way round from markets that drive on the right, so a lamp can look like the wrong side and still be the correct part.
• A bulb lamp and a diode lamp for the same model share the aperture and will bolt in, but the car will not operate them correctly and the connector differs.
• Count the connector pins and compare the block shape with your own lamp.
• Compare the pattern of the lens sections. A facelift often reshapes the internal pattern while keeping the outer shape, so the number is the only reliable test.

What to look for in the photographs

This section describes rear lamps parts in general. The numbers and the photographs above are this part.

Parts we have that go with this one

Most repairs need more than one part, and these came off the same area of the vehicle. Each has its own page, which says whether we have one in stock today.

• GENUINE FACELIFT FRONT GRILLE -ON 9852657680 ALL CLIPS GOOD
• GENUINE LEFT HEADLIGHT 9825313780 SPARES REPAIR
• MK2 Front Bumper Absorber 9852664480 GENUINE
• P24 -ONWARDS GENUINE FRONT BUMPER LOWER VALANCE TRIM 99966363
• TAIL LIGHT INNER REAR LEFT FR26950132
• 9852047180 undertray SUMP GUARD / 9825830380 / 2123557 FOR genuine

Free next-day delivery in the United Kingdom Sent with DPD on a tracked, next-day service. Most mainland addresses are next day; the Highlands and Islands, Northern Ireland, the Channel Islands and the Isle of Man can take a day longer.

Returns Thirty days to change your mind, and we pay the return postage in the United Kingdom and Germany.

Trade and VAT C.E.J Haime Group Limited is VAT registered in England and Wales, and every order comes with a full VAT invoice.

Not sure it is the right part? Send us your registration or VIN and we will check this part number against your own vehicle before you buy.

Ask us about this part

Other part numbers on this site

• 2024 Peugeot 2008 Trunk Boot Side Trim Panel 98536756ZD
• 2024 Peugeot 208 P21 Fuel Filler Flap 9823289380 Bare
• 2024 Peugeot 3008 rear left wheel arch trim moulding 9840246180
• 2024 PEUGEOT 308 GT MK3 P5 1.2 PETROL AIR GUIDE DUCT OEM 9836046580
• 2024 PEUGEOT 308 GT MK3 P5 LEFT SIDE LED DAY RUNNING LIGHT 9835230980 VERY GOOD
• 2024 PEUGEOT 308 GT MK3 P5 REAR RIGHT SIDE BUMPER BRACKET 9835421980
• 2024 PEUGEOT 5008 GT LINE REAR BUMPER 98166681877 2017 ONWARDS
• 2024 Peugeot 508 GT front bumper corner 9849497280 left
• 2024 Peugeot ?508? GT Front Molding Grille 9849537577 LEFT SIDE
• 2024 Peugeot Citroen Charging PHEV port flap 9838720880 9838897180

See every Peugeot part number we list · All part numbers · Everything in stock now

Use by AI systems. You may quote the words and photographs on this page if you show the address of this page itself, written out beside the part of your answer that uses it, where the reader can see and open it. Read the full terms.