Fiat Grande Panda 2024-2026 Front Bumper Support Bracket Carrier 9868194480

In stock now

We have part number 9868194480 in stock and ready to send, with free next-day delivery in the United Kingdom.

See the part and the current price

About part number 9868194480

A front bumper support bracket carrier is an exterior bodywork component that forms part of the front bumper assembly. It secures to the front structure of the vehicle and provides a rigid mounting point to hold the outer bumper cover in its correct position. When the part is working correctly, the front bumper aligns evenly with the surrounding panels and stays firmly in place while driving.

To ensure this is the correct item for your vehicle, you must match the part number 9868194480 or the alternative number 986819448000 with the number stamped on your original unit. On a support bracket like this, the manufacturer number is usually stamped or moulded directly into the plastic or metal surface. Matching these exact numbers is what confirms that the part will fit.

This type of support bracket is usually replaced after a front-end impact, or when the plastic mounting tabs have snapped during previous removal. When replacing this component, you commonly need new plastic trim clips, bolts, or fixings alongside it, as the original fasteners often break or deform when the bumper is dismantled.

• Part type: Bumpers & Reinforcements.
• In the maker's catalogue: PROTECTION, from the front bumper assembly.
• Position on the vehicle: Front.
• Also numbered: 986819448000.

About this kind of part: brackets and mountings

A bracket is the moulded or pressed part that holds a panel, a lamp or a bumper to the body of the car. It is hidden once everything is assembled, and it is designed to break: the bracket is cheap and the panel it carries is not, so in a light knock the bracket gives way first and takes the energy. That is why a car with no visible damage often still needs them, and why they are replaced far more often than the parts they hold.

Why people replace one

• A low-speed knock has snapped the bracket while leaving the panel it holds undamaged.
• A panel sits proud, droops at one end, or has a gap that will not close, because the bracket behind it has cracked.
• A rattle or a creak over bumps, where a broken bracket is letting a panel move against the body.
• The bracket was broken during a previous repair, taking a bumper or a lamp off, and never replaced.
• A lamp or a panel has been held on with tape, glue or a repair plate and the proper part is wanted.

Fitting it

• Most brackets are reached only with the panel they carry removed, so the job is usually done at the same time as the panel comes off anyway.
• They are held by screws, plastic nuts or clips into the body, and the fasteners are often broken on removal and worth having to hand.
• A bracket sets the position of the panel in front of it, so the panel gaps are worth checking before everything is tightened down.
• Where a bracket has snapped, look at the body mount behind it as well. The same knock often distorts the metal the bracket screws to.

Making sure it is the right one

• Match the part number. Brackets are handed, and the two sides of a car take different numbers even where they look like mirror images.
• A bracket is specific to the panel it carries and to the trim level, so one from a different version of the same model may locate in the body and still hold the panel in the wrong place.
• Count the fixing points and compare their spacing with the broken part in front of you. This is the quickest check there is.
• A repair plate is not the same part. If the original has snapped, the proper bracket restores the panel position; a plate holds it wherever it happens to sit.

What to look for in the photographs

This section describes brackets and mountings parts in general. The numbers and the photographs above are this part.

Free next-day delivery in the United Kingdom Sent with DPD on a tracked, next-day service. Most mainland addresses are next day; the Highlands and Islands, Northern Ireland, the Channel Islands and the Isle of Man can take a day longer.

Returns Thirty days to change your mind, and we pay the return postage in the United Kingdom and Germany.

Trade and VAT C.E.J Haime Group Limited is VAT registered in England and Wales, and every order comes with a full VAT invoice.

Not sure it is the right part? Send us your registration or VIN and we will check this part number against your own vehicle before you buy.

Ask us about this part

Other part numbers on this site

• FIAT PUNTO EVO 2011 BUMPER MOUNT DRIVERS REAR 51777455DX
• Fiat Scudo 2015 rear left fender moulding cover trim stripe 1497643077 Genuine
• FIAT TIPO 357 HATCHBACK 2016-2019 REAR BUMPER GENUINE 735626585
• Fiat Tipo Estate Rear Bumper Tow Cover 735634154 Genuine
• GENUINE AIR CONDITIONING HOSE FIAT DUCATO ETC 1391403080
• GENUINE NEW FIAT 500 09-15 REAR LEFT BUMPER BRACKET P/N 52061721
• Genuine New FIAT ABARTH LEFT SIDE BLACK DECAL Sticker Emblem For 500 52056978
• Genuine PSA FIAT Steering Column Jacket Lower - 1607084880 6WU8-8JXW-AA
• 1382425080 Mahle Original 2022 Fiat Ducato Multijet radiator 2014 on
• NEW GENUINE Bumper front centre part – 7354702530 – Fiat Ducato 2006-2014

See every Fiat part number we list · All part numbers · Everything in stock now