2023 LAND ROVER DISCOVERY SPORT 2019 - 2023 GENUINE FRONT BUMPER LOWER SECTION | Part number LK72-17F775-BAW
|
Part number LK72-17F775-BAW. We take parts off vehicles every week, and this page is updated with a link straight to the part as soon as another one arrives. OUT OF STOCK In the meantime you can see every Land Rover part we have in stock, or you can send us a message and we will tell you the day one comes in. |
Notify me when this part is back in stockLeave your email address and we will write to you the day part number LK72-17F775-BAW comes in. We use your address for that message only. |

The last part of this number we had in stock.
About part number LK72-17F775-BAWA front bumper lower section is an exterior body component that mounts to the bottom of the main front bumper assembly. It forms part of the vehicle's bodywork, helping to protect the underside of the engine bay from road debris, stone chips, and spray while guiding airflow under and around the vehicle. When properly fitted, it sits flush with the surrounding panels and gives the front of the vehicle a neat, complete appearance. To confirm that this component is correct for your vehicle, you must check that your original part displays the part number LK72-17F775-BAW. On body panels like this, the manufacturer part number is typically stamped or moulded directly into the plastic on the inner or rear surface. Matching this exact number is the only way to guarantee correct fitment, as physical dimensions and mounting points vary across different revisions. Lower bumper sections are commonly replaced following low-speed impacts, scuffs against high kerbs, or damage from loose road debris. Because this item requires a respray to match your vehicle's paintwork, you will need suitable body preparation materials and paint alongside it. You may also require replacement plastic trim clips, rivets, or fixings, as the original fasteners often break or wear out during removal.
|
About this kind of part: bumper coversA bumper cover is the painted plastic skin across the front or the rear of a car. It is not a structural part. Behind it sit a foam or honeycomb absorber and a steel or aluminium reinforcement bar, and those are what take an impact. The cover carries the grille apertures, the number plate plinth and the openings for parking sensors, washer jets and tow eyes, so one model can take several different covers depending on how it was specified when new. Why people replace one
Fitting it
Making sure it is the right one
What to look for in the photographs
This section describes bumper covers parts in general. The numbers and the photographs above are this part. |
|
Free next-day delivery in the United Kingdom Sent with DPD on a tracked, next-day service. Most mainland addresses are next day; the Highlands and Islands, Northern Ireland, the Channel Islands and the Isle of Man can take a day longer. Returns Thirty days to change your mind, and we pay the return postage in the United Kingdom and Germany. Trade and VAT C.E.J Haime Group Limited is VAT registered in England and Wales, and every order comes with a full VAT invoice. Not sure it is the right part? Send us your registration or VIN and we will check this part number against your own vehicle before you buy. |