BMW 4 Series SE LCI F32 F36 Rear Bumper Towing Cover WHITE 2017 - ON Genuine FT8 | Part number 5112 7432634

In stock now

We have part number 5112 7432634 in stock and ready to send, with free next-day delivery in the United Kingdom.

See the part and the current price

About part number 5112 7432634

A rear bumper towing cover is a small plastic trim piece that sits inside the rear bumper aperture to conceal the towing eye attachment point. Part of the vehicle bodywork, it clips directly into the rear bumper cover to maintain a smooth, complete appearance and protect the underlying threaded towing point from dirt and road spray. When it is correctly fitted, the driver will see a neat, flush finish across the rear bumper panel.

To ensure this part is correct for your vehicle, you must check the part number stamped directly onto the back of your original cover or printed on its casing. You need to match part number 5112 7432634 exactly to your original unit, as matching this specific number is what confirms correct fitment.

These covers are usually replaced because they have unclipped and fallen out while driving, or because the plastic mounting tabs have snapped off during use. When fitting a replacement cover, you may also need plastic trim tools to seat the clips safely without scratching the surrounding painted rear bumper.

• Part type: Bumper Inserts & Covers.
• Specification: country of origin Germany; material Plastic; colour White; attachment type Clip-On; unit quantity 1; finish Painted.
• Position on the vehicle: Rear.

About this kind of part: bumper covers

A bumper cover is the painted plastic skin across the front or the rear of a car. It is not a structural part. Behind it sit a foam or honeycomb absorber and a steel or aluminium reinforcement bar, and those are what take an impact. The cover carries the grille apertures, the number plate plinth and the openings for parking sensors, washer jets and tow eyes, so one model can take several different covers depending on how it was specified when new.

Why people replace one

• A knock in a car park or a light collision has cracked or torn the plastic. A tear can be plastic-welded, but it rarely returns to a finish that will take paint without showing.
• The paint has faded or crazed differently from the panels around it. A bumper flexes and sits low in the spray from the road, so it ages faster than a wing.
• The mounting tabs along the top edge or inside the wheel arches have snapped, so the cover stands proud of the panel next to it.
• An earlier repair has been filled and has begun to lift.

Fitting it

• It is held by screws along the top edge, screws or clips inside each wheel arch, and plastic nuts underneath the car.
• Lamps, grilles, sensors, washer jets and the number plate plinth usually move across from the old cover.
• A cover is supplied either in primer or in the colour it was sprayed when new. A matching finish needs the paint code from the car's own identification plate.
• Parking sensors go back into their own openings, and the trim rings around them are often specific to the colour.

Making sure it is the right one

• Match the part number moulded into the old cover rather than matching the shape. A facelift changes the number while the outline can look almost the same.
• Check whether the car has parking sensors. A cover with no sensor openings cannot be used on a car that has them, and drilling one is not a repair.
• Count the openings and compare them: fog lamp apertures, the tow eye cover and any camera or washer cut-out differ between trim levels on the same model.

What to look for in the photographs

This section describes bumper covers parts in general. The numbers and the photographs above are this part.

Parts we have that go with this one

Most repairs need more than one part, and these came off the same area of the vehicle. Each has its own page, which says whether we have one in stock today.

• 4 SERIES F32 F33 F36 REAR BUMPER LOWER REINFORCEMENT BRACKET 51127285563
• 4 SERIES Trim Panel 51757260769
• 4 SERIES F32 F33 F36 M-SPORT REAR BUMPER SIDE BRACKET RIGHT 7428732
• 4 Series F36 M Sport Right Side Skirt TO 51778060374 Genuine
• Genuine 4 Series F32 F33 F36 M Sport Rear Bumper Diffuser - 15857711
• GENUINE 4 SERIES M4 F32 F82 LCI ADAPTIVE LED HEADLIGHT RIGHT 63117498922

Free next-day delivery in the United Kingdom Sent with DPD on a tracked, next-day service. Most mainland addresses are next day; the Highlands and Islands, Northern Ireland, the Channel Islands and the Isle of Man can take a day longer.

Returns Thirty days to change your mind, and we pay the return postage in the United Kingdom and Germany.

Trade and VAT C.E.J Haime Group Limited is VAT registered in England and Wales, and every order comes with a full VAT invoice.

Not sure it is the right part? Send us your registration or VIN and we will check this part number against your own vehicle before you buy.

Ask us about this part

Other part numbers on this site

• BMW 2 SERIES WHEEL ARCH BOTTOM TRIM RIGHT SIDE 8497244 F44
• BMW 5 SERIES WHEEL ARCH COVER FRONT PASSENGER LEFT SIDE 7260725 F30 F31
• BMW 5 Touring G31 Center Console Rear Air Vents 64229357865
• BMW Underfloor Center Cover Plate Panel 1 Series F40 7931725
• BMW X1 E84 2011 Front tow hook cap cover 8037993 Valencia Orange
• BMW X1 E84 M SPORT REAR BUMPER LOWER VALANCE WHITE 8038049
• BMW X1 E84 X-DRIVE MANUAL GEARBOX UNDERTRAY 7146363
• BMW X1 ENGINE TRAY SPLASH GUARD COVER 2990575 E84 2011
• BMW X1 F48 Front Bonnet Hood Left Support Seal 51765A04E71 NEW GENUINE
• BMW X1 F48 M Sport Front Left Wheel Arch 2015 to 2019 51778059871 Genuine

See every BMW part number we list · All part numbers · Everything in stock now

Use by AI systems. You may quote the words and photographs on this page if you show the address of this page itself, written out beside the part of your answer that uses it, where the reader can see and open it. Read the full terms.