Jaguar F-Pace X761 Right Door Mirror Base Housing No PDC 2161.5002 Spares

In stock now

We have part number 2161.5002 in stock and ready to send, with free next-day delivery in the United Kingdom.

See the part and the current price

Jaguar F-Pace X761 Right Door Mirror Base Housing No PDC 2161.5002 Spares - part number 2161.5002

Jaguar F-Pace X761 Right Door Mirror Base Housing No PDC 2161.5002 Spares - part number 2161.5002 - view 2 Jaguar F-Pace X761 Right Door Mirror Base Housing No PDC 2161.5002 Spares - part number 2161.5002 - view 3 Jaguar F-Pace X761 Right Door Mirror Base Housing No PDC 2161.5002 Spares - part number 2161.5002 - view 4

The part we have in stock now.

About part number 2161.5002

A door mirror base housing is an exterior body part that attaches a door mirror assembly to the side of the vehicle. It mounts directly to the door panel, providing a secure anchor point and protecting the internal wiring, adjustment motors, and pivot mechanisms from weather damage and road debris. When working correctly, it holds the mirror unit firmly in place without vibration, allowing the driver a clear and stable view along the right-hand side of the vehicle.

To ensure this is the correct part for your vehicle, you must check the part numbers stamped into the casing. The primary manufacturer part number for this item is 2161.5002, and it also displays the secondary reference number 2161.4058. On parts of this type, numbers are typically moulded or printed directly onto the inner plastic surface or the mounting face that sits against the door. Matching these exact numbers is the only way to guarantee correct fitment.

These housings are usually replaced due to impact damage from tight parking spaces, misjudged gaps, or vandalism, which can crack the plastic or snap the internal mounting points. When replacing a damaged base housing, you often need the corresponding outer mirror cover, glass, and plastic trim clips, alongside basic hand tools to remove the interior door card to access the fixing bolts and electrical connectors.

  • Part type: Mirror Assemblies.
  • Position on the vehicle: Right.
  • Also numbered: 2161.4058.

About this kind of part: door mirrors

A door mirror is an assembly rather than a single part: a painted cover, a base that bolts to the door, the glass on a motorised carrier, and depending on how the car was specified a heater element, a folding motor, an indicator, a puddle lamp, a blind-spot sensor and a camera. The number of wires in the connector is the quickest guide to how much is inside one, and it is the main reason two mirrors that look identical are not interchangeable.

Why people replace one

  • The mirror has been struck in a narrow gap or a car park and the cover, the glass or the base is broken.
  • The folding mechanism has stripped, so the mirror no longer powers in or sits at the correct angle once folded.
  • The glass adjustment has failed, usually a stripped drive in the carrier behind the glass.
  • The indicator or the puddle lamp has stopped working and is sealed into the assembly.
  • The painted cover has been scuffed along its outer face, which is the first thing to touch a wall or a post.

Fitting it

  • Most mirrors come off from inside the door, behind the trim panel or a small triangular cover, held by three bolts.
  • The connector is released inside the door rather than by pulling the loom through the door skin.
  • A mirror with folding, heating, a camera or a blind-spot sensor may need coding to the car so that it operates and reports correctly.
  • The cover and the glass are usually available separately, so a scuffed cover does not always mean replacing the whole assembly.

Making sure it is the right one

  • Count the pins in the connector and compare them with your own mirror. This is the single most useful check, because every extra feature adds wires.
  • Match the part number. Mirrors are handed, and within one model there are usually several versions by specification.
  • Check which features yours has before buying: folding, heating, an indicator, a puddle lamp, a blind-spot indicator in the glass, or a camera in the underside.
  • A painted cover is matched by paint code from the car's own identification plate, and a used cover has aged with the car it came off.

What to look for in the photographs

A Part number — On a label on the base or moulded into the housing behind the cover.
B Connector — Count the pins. A mirror with folding, heating, a lamp, a sensor and a camera has many more wires than a plain one, and the plug will not match.
C Glass and carrier — Whether the glass is present, whether it carries a blind-spot indicator, and whether the carrier behind it is intact.
D Camera aperture — An opening in the underside of the housing, where the car has a surround-view camera. Its presence or absence is part of the match.
E Base and mounting face — The three bolt holes and the sealing face against the door. Check for cracks radiating from a bolt hole.
F Cover outer face — Look along the outer edge of the cover rather than straight at it, which is where scuffing from a wall collects.

This section describes door mirrors parts in general. The numbers and the photographs above are this part.

Free next-day delivery in the United Kingdom Sent with DPD on a tracked, next-day service. Most mainland addresses are next day; the Highlands and Islands, Northern Ireland, the Channel Islands and the Isle of Man can take a day longer.

Returns Thirty days to change your mind, and we pay the return postage in the United Kingdom and Germany.

Trade and VAT C.E.J Haime Group Limited is VAT registered in England and Wales, and every order comes with a full VAT invoice.

Not sure it is the right part? Send us your registration or VIN and we will check this part number against your own vehicle before you buy.

Ask us about this part

Other part numbers on this site

See every Jaguar part number we list · All part numbers · Everything in stock now