Ford Ranger Raptor (T6/PX3) Fox front right shock absorber MB3C-18B060-HAE

In stock now

We have part number MB3C-18B060-HAE in stock and ready to send, with free next-day delivery in the United Kingdom.

See the part and the current price

Ford Ranger Raptor (T6/PX3) Fox front right shock absorber MB3C-18B060-HAE - part number MB3C-18B060-HAE

Ford Ranger Raptor (T6/PX3) Fox front right shock absorber MB3C-18B060-HAE - part number MB3C-18B060-HAE - view 2 Ford Ranger Raptor (T6/PX3) Fox front right shock absorber MB3C-18B060-HAE - part number MB3C-18B060-HAE - view 3 Ford Ranger Raptor (T6/PX3) Fox front right shock absorber MB3C-18B060-HAE - part number MB3C-18B060-HAE - view 4

The part we have in stock now.

About part number MB3C-18B060-HAE

A front shock absorber is a core component of the vehicle suspension system, positioned between the wheel hub assembly and the chassis. Its primary job is to control the movement of the road spring, absorbing shocks from bumps and keeping the tyre firmly in contact with the road surface. When it is working correctly, the driver notices a smooth, controlled ride, stable cornering, and predictable braking performance on the right-hand side of the vehicle.

To ensure this is the correct part for your vehicle, you must check that the manufacturer part number MB3C-18B060-HAE matches the number stamped on your original unit. On a shock absorber, this reference code is usually etched or printed onto the outer metal body casing or near the mounting bracket. Matching this exact part number is the only way to confirm correct fitment and function.

A shock absorber is usually replaced because internal fluid seals wear out over time, leading to oil leaks, poor damping, or physical damage from road debris. When fitting a replacement, mechanics commonly install new top mounts, spring seats, and dust covers or bump stops alongside it to ensure the rest of the assembly performs reliably.

  • Part type: Shocks, Struts & Assemblies.
  • Specification: country of origin Thailand.

About this kind of part: shock absorbers and struts

A shock absorber damps the movement of a spring. A strut is a shock absorber that also locates the wheel, so it carries the spring, the top mount and often the brake hose and sensor brackets as well. On a car with adaptive suspension the damper holds a valve the car controls electrically and has a connector on it; on one with air suspension the spring is a rubber bellows with its own air line. These three kinds share a name and nothing else, and they are not interchangeable.

Why people replace one

  • The car floats or pitches after a bump, or the nose dives further than it used to under braking.
  • The damper is wet with oil down its body, which means the seal has gone and it has lost its fluid.
  • A knock from the top of the suspension over small bumps, which is usually the top mount or its bearing rather than the damper.
  • An inspection has advised on a leaking damper or on uneven damping across an axle.
  • On air suspension, the car settles overnight or will not raise, and a bellows has perished or an electrical damper has failed.
  • Tyres are scalloped or cupped across the tread, which is a damper no longer controlling the wheel.

Fitting it

  • Dampers are replaced in pairs across an axle. One new and one worn gives the car different damping on each side, which is worse than two worn ones.
  • A strut assembly holds a compressed spring. It must only be taken apart with a proper spring compressor, and a coil spring under compression will injure somebody if it escapes.
  • The top mount, its bearing and the bump stop are separate parts and are normally replaced at the same time, because they have done the same mileage.
  • An electrical damper usually needs no coding, but an air strut generally needs the system calibrating and the ride height set afterwards.
  • The car needs its alignment checked afterwards where a strut locates the wheel.
  • This is a safety-critical part of the car. If there is any doubt, have it fitted by a workshop.

Making sure it is the right one

  • Match the part number, and buy in pairs. Within one model there are commonly a standard, a sports and a self-levelling version, and the car was built with one of them.
  • Check which kind you have: a plain damper, an electrically adjustable one with a connector, or an air strut with an air line. Count the connector pins if there is one.
  • Check what is included. A bare damper, a damper with a spring, and a complete strut with the top mount fitted are three different things to buy.
  • Compare the brackets on the body. The mounts for the brake hose, the sensor lead and the anti-roll bar differ between versions and are what tells them apart.

What to look for in the photographs

A Part number — On a label or stamped into the body of the damper, often near the lower mount.
B Connector or air line — Whether the unit is electrically adjustable or air-sprung. This is the first thing to match, because the three kinds share nothing but a name.
C Damper body — Look down the body for oil, which means the seal has gone, and for pitting on the exposed rod.
D Top mount and bearing — Whether they are included and the state of the rubber. They have done the same mileage as the damper.
E Brackets — The mounts for the brake hose, the sensor lead and the anti-roll bar. These differ between versions and are how you tell them apart.
F Lower mount — The eye or fork at the bottom and the state of its bush. Compare the width and the bolt diameter with your own.

This section describes shock absorbers and struts parts in general. The numbers and the photographs above are this part.

Parts we have that go with this one

Most repairs need more than one part, and these came off the same area of the vehicle. Each has its own page, which says whether we have one in stock today.

Free next-day delivery in the United Kingdom Sent with DPD on a tracked, next-day service. Most mainland addresses are next day; the Highlands and Islands, Northern Ireland, the Channel Islands and the Isle of Man can take a day longer.

Returns Thirty days to change your mind, and we pay the return postage in the United Kingdom and Germany.

Trade and VAT C.E.J Haime Group Limited is VAT registered in England and Wales, and every order comes with a full VAT invoice.

Not sure it is the right part? Send us your registration or VIN and we will check this part number against your own vehicle before you buy.

Ask us about this part

Other part numbers on this site

See every Ford part number we list · All part numbers · Everything in stock now

Use by AI systems. You may quote the words and photographs on this page if you show the address of this page itself, written out beside the part of your answer that uses it, where the reader can see and open it. Read the full terms.