Honda Civic Mk10 17 Alloy Wheel 42700-TGN-G91 Needs Refurb + 235/45 R17 Tyre
|
Part number 42700-TGN-G91. We take parts off vehicles every week, and this page is updated with a link straight to the part as soon as another one arrives. OUT OF STOCK In the meantime you can see every Honda part we have in stock, or you can send us a message and we will tell you the day one comes in. |
Notify me when this part is back in stockLeave your email address and we will write to you the day part number 42700-TGN-G91 comes in. We use your address for that message only. |

The last part of this number we had in stock.
About part number 42700-TGN-G91An alloy wheel with a fitted tyre supports the weight of the vehicle, connects the suspension to the road surface, and enables steering and braking. The road wheel bolts directly to the wheel hub using a five-stud pattern with a 114.3 mm stud diameter. When the wheel and tyre assembly is undamaged and correctly balanced, the driver experiences a smooth ride, accurate steering control, and stable road holding. To confirm this part is the correct match for your vehicle, compare the part number directly with the number stamped or cast on your original wheel. The manufacturer part number for this item is 42700-TGN-G91, and you may also find the additional markings 170P0A or 8218 2 on the casing. Matching these exact numbers is the only way to guarantee correct fitment. When replacing a road wheel, you usually need the correct wheel nuts or bolts, and you may need a replacement tyre valve or pressure monitor sensor. Wheels are commonly replaced after sustaining impact damage from potholes or kerbs, or to replace a severely corroded unit that no longer holds air pressure correctly.
|
About this kind of part: alloy wheelsAn alloy wheel is a cast or forged aluminium wheel. Four numbers describe it and all four have to match the car: the diameter in inches, the rim width in inches followed by the letter J, the number of bolt holes with the circle they sit on in millimetres, and the offset, marked ET, which is how far the mounting face sits from the centre line. A casting number is marked on the back of the spokes or inside the rim, and that number is what identifies the exact wheel rather than one that merely looks the same. Why people replace one
Fitting it
Making sure it is the right one
What to look for in the photographs
This section describes alloy wheels parts in general. The numbers and the photographs above are this part. |
|
Free next-day delivery in the United Kingdom Sent with DPD on a tracked, next-day service. Most mainland addresses are next day; the Highlands and Islands, Northern Ireland, the Channel Islands and the Isle of Man can take a day longer. Returns Thirty days to change your mind, and we pay the return postage in the United Kingdom and Germany. Trade and VAT C.E.J Haime Group Limited is VAT registered in England and Wales, and every order comes with a full VAT invoice. Not sure it is the right part? Send us your registration or VIN and we will check this part number against your own vehicle before you buy. |