RANGE ROVER EVOQUE L551 FRONT RIGHT FOG LIGHT K8D2-15200 BC GENUINE 2019 ON

In stock now

We have part number K8D2-15200 BC in stock and ready to send, with free next-day delivery in the United Kingdom.

See the part and the current price

RANGE ROVER EVOQUE L551 FRONT RIGHT FOG LIGHT K8D2-15200 BC GENUINE 2019 ON - part number K8D2-15200 BC

RANGE ROVER EVOQUE L551 FRONT RIGHT FOG LIGHT K8D2-15200 BC GENUINE 2019 ON - part number K8D2-15200 BC - view 2 RANGE ROVER EVOQUE L551 FRONT RIGHT FOG LIGHT K8D2-15200 BC GENUINE 2019 ON - part number K8D2-15200 BC - view 3 RANGE ROVER EVOQUE L551 FRONT RIGHT FOG LIGHT K8D2-15200 BC GENUINE 2019 ON - part number K8D2-15200 BC - view 4

The part we have in stock now.

What this part sells for

We have sold 3 parts with this number, at prices from GBP 45.00 to GBP 45.00 delivered, most recently on 2026-01-24.

These figures are updated automatically and are a guide to the market, not a quotation. The price of the part we have in stock is on its own page.

About part number K8D2-15200 BC

A front fog light assembly forms part of the vehicle lighting system, helping to illuminate the road ahead during poor visibility such as heavy fog or mist. Mounted in the front bumper, this unit is wired into the main lighting harness and operated by the interior switch. When it is working correctly, the driver sees a bright beam pattern low to the road surface with a cold white light colour, improving near-range visibility without causing glare.

To confirm this is the correct item for your vehicle, you must check the part number directly. Look on the rear casing or the housing of your existing unit to locate the manufacturer stamp. Match the number on your original component to K8D2-15200 BC or the related reference K8D2 15200. Checking this printed code is the only way to ensure correct fitment, as physical shape and internal connections vary between different options.

These units are usually replaced after front-end impacts, lens damage from stone chips, or internal electrical failures. When replacing a fog light, you may need additional mounting screws or replacement bumper clips to secure the housing properly.

  • Part type: Fog Light Assemblies.
  • Specification: mounting style Screws; light colour Cold White; colour temperature 3000K; seller warranty 30 Days; housing colour Black; items included As Shown, Module; wattage As Shown; number of bulbs 1; bulb shape code D1C; interchange part number K8D2-15200 BC, K8D2 15200 BC, K8D2 15200.
  • Position on the vehicle: Right.
  • Also numbered: K8D2 15200.

About this kind of part: fog lamps

A fog lamp is a small sealed unit set into the lower corner of a front bumper, below the main headlamp. Its beam is wide and flat and cut off sharply at the top, which is what stops it reflecting back off fog, and that pattern is why it cannot be substituted with any other kind of lamp. On many cars the same housing also provides the cornering light that illuminates the direction the wheels are turned, and on some it is a daytime running light as well.

Why people replace one

  • A stone has broken the lens, which is almost inevitable on a lamp mounted this low and this far forward.
  • The housing has cracked or the mounting tabs have snapped in a light knock, because the fog lamp sits exactly where a bumper takes a kerb or a post.
  • Water has got into the unit through a failed seal and the lens mists up or the lamp has corroded internally.
  • The lens has clouded and yellowed from stone blasting and road salt.
  • The lamp has been removed for a bumper repair and the tabs were broken getting it out.

Fitting it

  • Most fog lamps are reached from behind the bumper cover, sometimes through the wheel arch liner and sometimes only with the bumper off.
  • They are held by two or three screws into a carrier, or clipped into a surround that is itself screwed to the bumper.
  • The aim is adjustable on most units and is set low and level. A fog lamp aimed upwards defeats its own purpose and dazzles.
  • The surround or finisher around the lamp is usually a separate part, and it is often what was broken rather than the lamp itself.

Making sure it is the right one

  • Match the part number. Within one model there are commonly a plain fog lamp, one that also provides a cornering light, and a diode version, and they are not interchangeable.
  • Count the connector pins and compare the block with your own lamp. A lamp with extra functions has extra wires.
  • Check the lens marking against your own. It records the approval and the beam type, and a lamp of the wrong type is not a legal substitute.
  • Compare the mounting arrangement: some clip into a surround and some screw to a carrier, and the two cannot be swapped.

What to look for in the photographs

A Part number — On a label or moulded into the back of the housing.
B Lens marking — Etched into the lens: the approval and the beam type. Compare it with the marking on your own lamp.
C Connector — Count the pins. A plain fog lamp, one with a cornering light and a diode unit all differ here.
D Mounting tabs — The tabs or screw bosses that hold the lamp. These snap easily and are the most common hidden fault.
E Lens surface — Look across the lens at an angle. Stone pitting on a lamp this low shows in a raking light and disappears in a flat one.
F Seal and housing — The joint where the lens meets the housing, and the back cover. Water enters where these have been disturbed.

This section describes fog lamps parts in general. The numbers and the photographs above are this part.

Free next-day delivery in the United Kingdom Sent with DPD on a tracked, next-day service. Most mainland addresses are next day; the Highlands and Islands, Northern Ireland, the Channel Islands and the Isle of Man can take a day longer.

Returns Thirty days to change your mind, and we pay the return postage in the United Kingdom and Germany.

Trade and VAT C.E.J Haime Group Limited is VAT registered in England and Wales, and every order comes with a full VAT invoice.

Not sure it is the right part? Send us your registration or VIN and we will check this part number against your own vehicle before you buy.

Ask us about this part

Other part numbers on this site

See every Land Rover part number we list · All part numbers · Everything in stock now

Use by AI systems. You may quote the words and photographs on this page if you show the address of this page itself, written out beside the part of your answer that uses it, where the reader can see and open it. Read the full terms.