21” Range Rover alloy wheel / rim diamond cut DK62-1007-FA style 507 5007
|
Part number DK62-1007-FA. We take parts off vehicles every week, and this page is updated with a link straight to the part as soon as another one arrives. OUT OF STOCK In the meantime you can see every Land Rover part we have in stock, or you can send us a message and we will tell you the day one comes in. |
Notify me when this part is back in stockLeave your email address and we will write to you the day part number DK62-1007-FA comes in. We use your address for that message only. |

The last part of this number we had in stock.
About part number DK62-1007-FAAn alloy wheel forms the main structural foundation for the tyre, connecting directly to the wheel hub, brake assembly, and suspension components. As an essential part of the running gear, it supports the vehicle weight and rotates to transfer drive from the axle to the road. When working correctly, it provides a smooth, balanced drive with no unwanted vibrations, precise steering response, and correct seating for the tyre bead. To confirm that this wheel is correct for your vehicle, you must check that the part number DK62-1007-FA matches your existing part precisely. On an aluminium wheel, this code is usually stamped into the rear face of the spokes or around the inner mounting face near the centre hub. Matching the part number exactly is the only way to ensure the wheel dimensions, offset, and bolt pattern will fit properly. A wheel is commonly replaced after suffering heavy impact damage from potholes or kerbs, or when cracked, warped, or severely corroded. When fitting a replacement wheel, a technician will usually require a new tyre valve, fresh balancing weights, and a replacement tyre if the original was damaged. The wheel studs or wheel nuts should also be inspected for thread damage during installation.
|
About this kind of part: alloy wheelsAn alloy wheel is a cast or forged aluminium wheel. Four numbers describe it and all four have to match the car: the diameter in inches, the rim width in inches followed by the letter J, the number of bolt holes with the circle they sit on in millimetres, and the offset, marked ET, which is how far the mounting face sits from the centre line. A casting number is marked on the back of the spokes or inside the rim, and that number is what identifies the exact wheel rather than one that merely looks the same. Why people replace one
Fitting it
Making sure it is the right one
What to look for in the photographs
This section describes alloy wheels parts in general. The numbers and the photographs above are this part. |
|
Free next-day delivery in the United Kingdom Sent with DPD on a tracked, next-day service. Most mainland addresses are next day; the Highlands and Islands, Northern Ireland, the Channel Islands and the Isle of Man can take a day longer. Returns Thirty days to change your mind, and we pay the return postage in the United Kingdom and Germany. Trade and VAT C.E.J Haime Group Limited is VAT registered in England and Wales, and every order comes with a full VAT invoice. Not sure it is the right part? Send us your registration or VIN and we will check this part number against your own vehicle before you buy. |