18 On Audi A1 S Line Right Front Bumper Lower Grill Genuine 82A807682E

Part number 82A807682E. We take parts off vehicles every week, and this page is updated with a link straight to the part as soon as another one arrives.

OUT OF STOCK

In the meantime you can see every Audi part we have in stock, or you can send us a message and we will tell you the day one comes in.

Notify me when this part is back in stock

Leave your email address and we will write to you the day part number 82A807682E comes in. We use your address for that message only.

What this part sells for

We have sold 2 parts with this number, at prices from GBP 67.00 to GBP 79.00 delivered, most recently on 2026-08-10.

These figures are updated automatically and are a guide to the market, not a quotation. The price of the part we have in stock is on its own page.

About part number 82A807682E

A bumper grill is a protective trim panel that sits in the lower front bodywork of a vehicle. Part of the exterior trim and cooling system layout, it clips into the front bumper assembly to allow airflow towards the engine compartment and radiators while blocking larger road debris, stone chips, and dirt from causing damage underneath. When the panel is intact and correctly fitted, it keeps the front bodywork looking complete, supports stable engine cooling, and prevents wind noise or rattling from loose trim at higher speeds.

To confirm that this item is correct for your vehicle, you must check that the manufacturer part number matches your original component exactly. You will find the reference number 82A807682E stamped or moulded directly into the plastic on the reverse side of the panel. Matching this exact code is the only way to ensure the correct shape, mounting clip positions, and outer trim profile, as subtle design variations exist across different equipment options.

These lower grills are usually replaced after minor front-end collisions, parking scuffs, or impact from loose road stones that crack the plastic legs and mesh. When replacing this component, you may also need replacement plastic bumper clips, trim fasteners, or adjacent lower spoiler mouldings if the original fixings broke during the damage or during removal of the old panel.

About this kind of part: grilles

A grille is the moulded panel across the front of a car that lets air through to the radiator and carries the maker's badge. On a modern car it is rarely one piece: there is usually an upper grille set into the bonnet line, a lower grille in the bumper cover, and separate side inserts. Many now also hold the forward radar, a camera or the active shutters that close off the airflow, so the same model can take several different grilles depending on what was specified when new.

Why people replace one

• A stone or a light knock has broken one of the slats, which cannot be glued back without showing.
• The chrome or bright finish on the surround has lifted and started to flake, which spreads once the plating is broken.
• The clips along the back have snapped, so the grille stands away from the bumper cover at one corner.
• A badge mount has broken and the badge no longer sits flat.
• The gloss black finish has gone dull and grey from washing and road grit.

Fitting it

• A grille is usually held by clips around its edge and a few screws reached from behind, which often means taking the bumper cover off to reach them.
• The badge, any surround trim and the radar or camera bracket normally transfer from the old grille.
• Work the clips from behind rather than pulling on the slats, which break easily when cold.
• If the grille carries a radar or a camera, that unit will usually need aiming or calibrating after it is disturbed.

Making sure it is the right one

• Match the part number moulded on the back. A grille from a different trim level will clip in and sit correctly while being the wrong pattern or the wrong finish.
• Check whether the grille has an opening or a mount for a radar or a camera. One without the mount cannot carry the unit, and one with it looks wrong on a car that has none.
• Compare the finish as well as the shape: the same grille is made in gloss black, in a bright finish and in body colour, and these are separate part numbers.
• Count the fixing points and compare their positions with your own grille before buying.

What to look for in the photographs

This section describes grilles parts in general. The numbers and the photographs above are this part.

Free next-day delivery in the United Kingdom Sent with DPD on a tracked, next-day service. Most mainland addresses are next day; the Highlands and Islands, Northern Ireland, the Channel Islands and the Isle of Man can take a day longer.

Returns Thirty days to change your mind, and we pay the return postage in the United Kingdom and Germany.

Trade and VAT C.E.J Haime Group Limited is VAT registered in England and Wales, and every order comes with a full VAT invoice.

Not sure it is the right part? Send us your registration or VIN and we will check this part number against your own vehicle before you buy.

Ask us about this part

Other part numbers on this site

• 19 On Audi A3 S Line / S3 8Y Front Bumper Spoiler Lip Genuine 8Y0807110
• 19 On Audi E Tron E-Tron Rear Bumper Reinforcement Genuine 4KE807385
• 1x Genuine Audi A3 8Y 17” Alloy Wheel Rim 8Jx17 8Y0601025D Kerb Rashed
• 1x Genuine Audi A3 8Y 18" Diamond Cut Alloy Wheel 8Jx18 8Y0601025H
• 2011 AUDI A5 Mk1 2007-2011 Rear Bumper 8T0807521D
• 2012 2013 2014 2015 2016 AUDI A3 8V GENUINE FRONT BUMPER 8V3807437AP
• 2012 AUDI A6 C7 BUMPER MOUNT BRACKET REAR RIGHT 4G5807394
• 2013 AUDI A1 ALLOY WHEEL WITH TYRE 215 40 17 8X0601025AP
• 2013 Audi Q3 - O/S Drivers Fog Light Grille - 8U0 807 682 D
• 2014 AUDI A4 S-LINE REAR BUMPER DIFFUSER GENUINE 8K0807521J

See every Audi part number we list · All part numbers · Everything in stock now

Use by AI systems. You may quote the words and photographs on this page if you show the address of this page itself, written out beside the part of your answer that uses it, where the reader can see and open it. Read the full terms.