Jaguar I Pace Front Right Side Door Moulding J9D3-21064-A Genuine
|
In stock now We have part number J9D3-21064-A in stock and ready to send, with free next-day delivery in the United Kingdom. See the part and the current price We have 2 of this part number in stock today. |

![]() |
![]() |
![]() |
The parts we have in stock now.
|
What this part sells for We last sold a part with this number on 2026-03-12 for GBP 49.00, delivered. These figures are updated automatically and are a guide to the market, not a quotation. The price of the part we have in stock is on its own page. |
About part number J9D3-21064-AA front door moulding is an exterior trim panel that attaches to the lower section of the outer door skin. It protects the surrounding paintwork from light impacts, stone chips and debris thrown up by the front tyre, while improving airflow along the side of the vehicle. When the moulding is correctly fitted, it sits flush against the panel to prevent wind noise and maintain a clean exterior appearance. To confirm that this part is correct for your vehicle, you must check the manufacturer part number against the number stamped onto your original trim. On parts of this type, the main reference number J9D3-21064-A or secondary code NN30032258 is typically moulded into the inner plastic casing or back face. Matching these exact numbers is the only way to guarantee correct fitment, as clip alignments vary between designs. External mouldings are commonly replaced after low-speed impacts, scuffs or when original fixing clips snap and allow the trim to come loose. When fitting a replacement panel, you will usually need new plastic retaining clips and trim adhesive tape to secure it firmly. Because this part requires a respray to match your vehicle paint, it must be prepped and painted before final installation on the right-hand side.
|
About this kind of part: trim mouldingsA trim moulding is a long, narrow strip that finishes an edge or a joint on the outside of a car: a door moulding, a sill cover, a wheel arch trim, a window finisher or a roof strip. Most are plastic, either painted to match the body or supplied in a textured black or a bright finish, and they clip to studs or to double-sided tape. They are cosmetic rather than structural, but they also cover the panel joint underneath, so a missing one leaves a gap where water and grit collect. Why people replace one
Fitting it
Making sure it is the right one
What to look for in the photographs
This section describes trim mouldings parts in general. The numbers and the photographs above are this part. |
Parts we have that go with this oneMost repairs need more than one part, and these came off the same area of the vehicle. Each has its own page, which says whether we have one in stock today.
|
|
Free next-day delivery in the United Kingdom Sent with DPD on a tracked, next-day service. Most mainland addresses are next day; the Highlands and Islands, Northern Ireland, the Channel Islands and the Isle of Man can take a day longer. Returns Thirty days to change your mind, and we pay the return postage in the United Kingdom and Germany. Trade and VAT C.E.J Haime Group Limited is VAT registered in England and Wales, and every order comes with a full VAT invoice. Not sure it is the right part? Send us your registration or VIN and we will check this part number against your own vehicle before you buy. |


