Range Rover Vogue L460 LED Tail Light right 2022 on M8E2-13404-AL Genuine

In stock now

We have part number M8E213404AL in stock and ready to send, with free next-day delivery in the United Kingdom.

See the part and the current price

We have 2 of this part number in stock today.

Range Rover Vogue L460 LED Tail Light right 2022 on M8E2-13404-AL Genuine - part number M8E213404AL

Range Rover Vogue L460 LED Tail Light right 2022 on M8E2-13404-AL Genuine - part number M8E213404AL - view 2 Range Rover Vogue L460 LED Tail Light right 2022 on M8E2-13404-AL Genuine - part number M8E213404AL - view 3 Range Rover Vogue L460 LED Tail Light right 2022 on M8E2-13404-AL Genuine - part number M8E213404AL - view 4

The parts we have in stock now.

What this part sells for

We last sold a part with this number on 2026-10-06 for GBP 99.00, delivered.

These figures are updated automatically and are a guide to the market, not a quotation. The price of the part we have in stock is on its own page.

About part number M8E213404AL

This part is a right-hand side rear light assembly, which forms part of the vehicle's exterior lighting system. It connects directly to the main wiring harness and provides essential illumination for braking, indicating, and night driving. When the unit is working correctly, the driver benefits from clear, bright signals that make the vehicle visible to other road users in low light and bad weather.

To ensure this is the correct component, you must match the part number M8E213404AL directly with the number stamped or printed on your original unit. You may also find the secondary number 13072305S15 marked on the housing. Matching these numbers is the only way to guarantee a correct fit, as vehicle models often use different lighting designs.

A rear lamp is usually replaced after sustaining physical damage, such as a cracked lens from a minor impact, or due to internal electrical failure. When fitting a replacement unit, it is common practice to inspect the wiring connector for corrosion and check that any mounting screws or clips are in good condition before securing the assembly.

  • Part type: Rear Light Assemblies.
  • Specification: country of origin United Kingdom; wattage 2 W; voltage 12 V; features Facelift Headlights, Sealed Assembly; finish Polished; lighting technology LED; mounting style Screws; number of bulbs 1; country/region of manufacture United Kingdom.
  • Position on the vehicle: Right, OS, DRIVER.
  • Also numbered: 13072305S15.

About this kind of part: rear lamps

A rear lamp holds several separate functions in one housing: the tail light, the brake light, the indicator, the reversing light and the rear fog light. On most cars one lamp carries the reversing light and the other carries the rear fog light, so the two sides are not mirror images of each other in what they actually do. The light source is a bulb or a set of light-emitting diodes, and a diode lamp cannot be converted to bulbs.

Why people replace one

  • The lens has cracked, usually from a knock while reversing, and water has got into the housing.
  • The red lens has faded to pink where it has stood in the sun, which shows most on an older car.
  • A diode section has gone dark in patches, which cannot be repaired because the diodes are sealed into the unit.
  • The housing is sound but a mounting stud or lug has broken, so the lamp no longer pulls up tight against its seal and lets water past.
  • Condensation sits inside after rain, because a bulb holder seal or a breather has perished.

Fitting it

  • Most rear lamps are reached from inside the boot or the tailgate aperture, behind a trim panel or a removable cover.
  • The lamp is held by two or three nuts on studs and then pulls straight back out of its locating pegs.
  • The foam or rubber seal around the back of the lamp is what keeps water out of the boot. If it has hardened, water will find its way in whatever else is done.
  • On a car with diode lamps the car may watch the current drawn by each function, so a mismatched unit can log a fault.

Making sure it is the right one

  • Match the part number, not the side of the car. The reversing light and the rear fog light sit on opposite sides, and markets that drive on the left put them the other way round from markets that drive on the right, so a lamp can look like the wrong side and still be the correct part.
  • A bulb lamp and a diode lamp for the same model share the aperture and will bolt in, but the car will not operate them correctly and the connector differs.
  • Count the connector pins and compare the block shape with your own lamp.
  • Compare the pattern of the lens sections. A facelift often reshapes the internal pattern while keeping the outer shape, so the number is the only reliable test.

What to look for in the photographs

A Part number — On a printed label on the back of the housing, or moulded into the plastic near the connector.
B Connector block — The plug on the back. Count the pins and compare the shape, because a bulb unit and a diode unit differ here.
C Function layout — Which section is the reversing light and which is the rear fog light. These sit on opposite sides of the car, and the other way round in markets that drive on the other side of the road.
D Mounting studs and lugs — The threaded studs and locating pegs on the back. A broken one means the lamp cannot be pulled tight against its seal.
E Seal face — The foam or rubber seal around the back edge. This is what keeps water out of the boot.
F Lens surface — Look at the lens at an angle rather than straight on, which shows up fine crazing and any fading that a flat photograph hides.

This section describes rear lamps parts in general. The numbers and the photographs above are this part.

Parts we have that go with this one

Most repairs need more than one part, and these came off the same area of the vehicle. Each has its own page, which says whether we have one in stock today.

Free next-day delivery in the United Kingdom Sent with DPD on a tracked, next-day service. Most mainland addresses are next day; the Highlands and Islands, Northern Ireland, the Channel Islands and the Isle of Man can take a day longer.

Returns Thirty days to change your mind, and we pay the return postage in the United Kingdom and Germany.

Trade and VAT C.E.J Haime Group Limited is VAT registered in England and Wales, and every order comes with a full VAT invoice.

Not sure it is the right part? Send us your registration or VIN and we will check this part number against your own vehicle before you buy.

Ask us about this part

Other part numbers on this site

See every Land Rover part number we list · All part numbers · Everything in stock now

Use by AI systems. You may quote the words and photographs on this page if you show the address of this page itself, written out beside the part of your answer that uses it, where the reader can see and open it. Read the full terms.