2023 Right Mirror Housing Audi A3 2020 Onwards 8Y2857410A 9B9 Genuine

Part number 8Y2857410A. We take parts off vehicles every week, and this page is updated with a link straight to the part as soon as another one arrives.

OUT OF STOCK

In the meantime you can see every Audi part we have in stock, or you can send us a message and we will tell you the day one comes in.

Notify me when this part is back in stock

Leave your email address and we will write to you the day part number 8Y2857410A comes in. We use your address for that message only.

About part number 8Y2857410A

A door mirror housing is an exterior body part that covers and protects the internal mirror mechanism, wiring, and glass motor assembly. Positioned on the outside of the vehicle, it shields delicate electrical components from rain, road dirt, and wind while helping to maintain the aerodynamic profile of the car. When it is intact and correctly fitted, it provides a secure enclosure for the mirror assembly and ensures the mirror glass remains stable without vibrating while driving.

To confirm that this component is the correct item for your vehicle, you must match the manufacturer part number directly. The part number for this item is 8Y2857410A. On a mirror housing, this number is typically stamped or printed on the inner plastic casing, which becomes visible once the cover is removed from the main mirror assembly. Vehicle fitment depends entirely on matching this exact number rather than relying on vehicle model details.

Door mirror housings are usually replaced because of impact damage from tight parking spaces, light collisions, or severe surface scratches to the plastic. When replacing this component, a fitter often needs basic trim removal tools to detach the casing without snapping the plastic mounting clips, and replacement internal clips or mirror glass may also be required if the original fittings were damaged during the impact.

About this kind of part: door mirrors

A door mirror is an assembly rather than a single part: a painted cover, a base that bolts to the door, the glass on a motorised carrier, and depending on how the car was specified a heater element, a folding motor, an indicator, a puddle lamp, a blind-spot sensor and a camera. The number of wires in the connector is the quickest guide to how much is inside one, and it is the main reason two mirrors that look identical are not interchangeable.

Why people replace one

  • The mirror has been struck in a narrow gap or a car park and the cover, the glass or the base is broken.
  • The folding mechanism has stripped, so the mirror no longer powers in or sits at the correct angle once folded.
  • The glass adjustment has failed, usually a stripped drive in the carrier behind the glass.
  • The indicator or the puddle lamp has stopped working and is sealed into the assembly.
  • The painted cover has been scuffed along its outer face, which is the first thing to touch a wall or a post.

Fitting it

  • Most mirrors come off from inside the door, behind the trim panel or a small triangular cover, held by three bolts.
  • The connector is released inside the door rather than by pulling the loom through the door skin.
  • A mirror with folding, heating, a camera or a blind-spot sensor may need coding to the car so that it operates and reports correctly.
  • The cover and the glass are usually available separately, so a scuffed cover does not always mean replacing the whole assembly.

Making sure it is the right one

  • Count the pins in the connector and compare them with your own mirror. This is the single most useful check, because every extra feature adds wires.
  • Match the part number. Mirrors are handed, and within one model there are usually several versions by specification.
  • Check which features yours has before buying: folding, heating, an indicator, a puddle lamp, a blind-spot indicator in the glass, or a camera in the underside.
  • A painted cover is matched by paint code from the car's own identification plate, and a used cover has aged with the car it came off.

What to look for in the photographs

A Part number — On a label on the base or moulded into the housing behind the cover.
B Connector — Count the pins. A mirror with folding, heating, a lamp, a sensor and a camera has many more wires than a plain one, and the plug will not match.
C Glass and carrier — Whether the glass is present, whether it carries a blind-spot indicator, and whether the carrier behind it is intact.
D Camera aperture — An opening in the underside of the housing, where the car has a surround-view camera. Its presence or absence is part of the match.
E Base and mounting face — The three bolt holes and the sealing face against the door. Check for cracks radiating from a bolt hole.
F Cover outer face — Look along the outer edge of the cover rather than straight at it, which is where scuffing from a wall collects.

This section describes door mirrors parts in general. The numbers and the photographs above are this part.

Free next-day delivery in the United Kingdom Sent with DPD on a tracked, next-day service. Most mainland addresses are next day; the Highlands and Islands, Northern Ireland, the Channel Islands and the Isle of Man can take a day longer.

Returns Thirty days to change your mind, and we pay the return postage in the United Kingdom and Germany.

Trade and VAT C.E.J Haime Group Limited is VAT registered in England and Wales, and every order comes with a full VAT invoice.

Not sure it is the right part? Send us your registration or VIN and we will check this part number against your own vehicle before you buy.

Ask us about this part

Other part numbers on this site

See every Audi part number we list · All part numbers · Everything in stock now