RANGE ROVER 2018+ FACELIFT FRONT BUMPER PIECE L405 JK5M-17K945-A GENUINE LR

In stock now

We have part number JK5M-17K945-A in stock and ready to send, with free next-day delivery in the United Kingdom.

See the part and the current price

About part number JK5M-17K945-A

A front bumper piece forms part of the vehicle's exterior bodywork and bumper assembly. It attaches to the front bumper structure to complete the outer body shape, protect underlying components from road debris, and maintain proper airflow around the vehicle. When the correct piece is fitted properly, it sits flush with the surrounding body panels and gives the front end a neat, complete appearance.

To confirm that this part is correct for your vehicle, you must check that your original part has the exact part number JK5M-17K945-A. On exterior trim and bumper sections, manufacturer part numbers are usually stamped or moulded into the plastic on the inner or rear surface. Matching the part number precisely is the only way to ensure the correct fit and alignment.

These trim pieces are usually replaced after sustaining impact damage, cracks, or scuffs during minor accidents or parking incidents. When replacing a bumper piece, you may also need new plastic retaining clips, screws, or mounting brackets to secure it firmly to the bumper skin.

• Part type: Bumpers & Reinforcements.
• Specification: brand type Genuine OEM; colour Grey.
• Position on the vehicle: Front.

About this kind of part: bumper covers

A bumper cover is the painted plastic skin across the front or the rear of a car. It is not a structural part. Behind it sit a foam or honeycomb absorber and a steel or aluminium reinforcement bar, and those are what take an impact. The cover carries the grille apertures, the number plate plinth and the openings for parking sensors, washer jets and tow eyes, so one model can take several different covers depending on how it was specified when new.

Why people replace one

• A knock in a car park or a light collision has cracked or torn the plastic. A tear can be plastic-welded, but it rarely returns to a finish that will take paint without showing.
• The paint has faded or crazed differently from the panels around it. A bumper flexes and sits low in the spray from the road, so it ages faster than a wing.
• The mounting tabs along the top edge or inside the wheel arches have snapped, so the cover stands proud of the panel next to it.
• An earlier repair has been filled and has begun to lift.

Fitting it

• It is held by screws along the top edge, screws or clips inside each wheel arch, and plastic nuts underneath the car.
• Lamps, grilles, sensors, washer jets and the number plate plinth usually move across from the old cover.
• A cover is supplied either in primer or in the colour it was sprayed when new. A matching finish needs the paint code from the car's own identification plate.
• Parking sensors go back into their own openings, and the trim rings around them are often specific to the colour.

Making sure it is the right one

• Match the part number moulded into the old cover rather than matching the shape. A facelift changes the number while the outline can look almost the same.
• Check whether the car has parking sensors. A cover with no sensor openings cannot be used on a car that has them, and drilling one is not a repair.
• Count the openings and compare them: fog lamp apertures, the tow eye cover and any camera or washer cut-out differ between trim levels on the same model.

What to look for in the photographs

This section describes bumper covers parts in general. The numbers and the photographs above are this part.

Parts we have that go with this one

Most repairs need more than one part, and these came off the same area of the vehicle. Each has its own page, which says whether we have one in stock today.

• Land Rover L405 rear bumper CK5217C945AA
• GENUINE L405 REAR RIGHT SEAT BOLSTER C-PILLAR LEATHER TRIM CK5202650 | Part nu
• LAND ROVER L405 Front Right Seat Lower Cover JK52-61424-ACW 2018on | Part numb
• Land Rover L405 Muffler/silencer/back box m8e25g2110ba
• Door Moulding Right Rear L405 CK52274A48AC
• L405 4.4 SDV8 REAR TAILGATE LOWER CARPET TRIM EBONY CK52425A92A
• L405 REAR LOWER TAILGATE BOOT SILL TRIM CK5213D748A

Free next-day delivery in the United Kingdom Sent with DPD on a tracked, next-day service. Most mainland addresses are next day; the Highlands and Islands, Northern Ireland, the Channel Islands and the Isle of Man can take a day longer.

Returns Thirty days to change your mind, and we pay the return postage in the United Kingdom and Germany.

Trade and VAT C.E.J Haime Group Limited is VAT registered in England and Wales, and every order comes with a full VAT invoice.

Not sure it is the right part? Send us your registration or VIN and we will check this part number against your own vehicle before you buy.

Ask us about this part

Other part numbers on this site

• m8e2-404c10-cc Range Rover actuator L460 LEFT HAND LOWER LR153799
• 21” Range Rover alloy wheel / rim diamond cut DK62-1007-FA style 507 5007
• RANGE ROVER DISCOVERY ACC CRUISE CONTROL ADAPTIVE KY32-9G768-AH LR113193
• Range Rover Discovery Front Left Door Moulding 2017 ON HY3M-21065-AC Genuine
• RANGE ROVER EVOQUE 2015 -ON GENUINE SPOILER LED BRAKE LIGHT - FK7213A613AC
• Range Rover Evoque 2018 RIGHT Fog Grill P/N GJ3215A298B Genuine NEXT DAY DELIVER
• 2011 - 2018 RANGE ROVER EVOQUE DOOR TRIM OUTER FRONT RIGHT BJ3M274A48B
• Range Rover Evoque Front Bumper Left Air Duct Bracket K8D2-17E951 Genuine | Part number K8D2-17E951-CC
• Range Rover Evoque Front Bumper Left Air Duct Bracket M8D2-17E951 Genuine
• Range Rover Evoque Front Bumper Left Parking Sensor Frame GJ32-15K873-A Genuine

See every Land Rover part number we list · All part numbers · Everything in stock now

Use by AI systems. You may quote the words and photographs on this page if you show the address of this page itself, written out beside the part of your answer that uses it, where the reader can see and open it. Read the full terms.